X7ROOT File Manager
Current Path:
/lib64/python3.6/config-3.6m-x86_64-linux-gnu
lib64
/
python3.6
/
config-3.6m-x86_64-linux-gnu
/
ðŸ“
..
📄
Makefile
(70.14 KB)
📄
Setup
(14.64 KB)
📄
Setup.config
(327 B)
📄
Setup.local
(41 B)
ðŸ“
__pycache__
📄
config.c
(3.26 KB)
📄
config.c.in
(1.58 KB)
📄
install-sh
(6.96 KB)
📄
makesetup
(7.34 KB)
📄
python-config.py
(2 KB)
📄
python.o
(51.19 KB)
Editing: Makefile
# Generated automatically from Makefile.pre by makesetup. # Top-level Makefile for Python # # As distributed, this file is called Makefile.pre.in; it is processed # into the real Makefile by running the script ./configure, which # replaces things like @spam@ with values appropriate for your system. # This means that if you edit Makefile, your changes get lost the next # time you run the configure script. Ideally, you can do: # # ./configure # make # make test # make install # # If you have a previous version of Python installed that you don't # want to overwrite, you can use "make altinstall" instead of "make # install". Refer to the "Installing" section in the README file for # additional details. # # See also the section "Build instructions" in the README file. # === Variables set by makesetup === MODNAMES= _thread posix errno pwd _sre _codecs _weakref _functools _operator _collections itertools atexit _signal _stat time _locale _io zipimport faulthandler _tracemalloc _symtable xxsubtype MODOBJS= Modules/_threadmodule.o Modules/posixmodule.o Modules/errnomodule.o Modules/pwdmodule.o Modules/_sre.o Modules/_codecsmodule.o Modules/_weakref.o Modules/_functoolsmodule.o Modules/_operator.o Modules/_collectionsmodule.o Modules/itertoolsmodule.o Modules/atexitmodule.o Modules/signalmodule.o Modules/_stat.o Modules/timemodule.o Modules/_localemodule.o Modules/_iomodule.o Modules/iobase.o Modules/fileio.o Modules/bytesio.o Modules/bufferedio.o Modules/textio.o Modules/stringio.o Modules/zipimport.o Modules/faulthandler.o Modules/_tracemalloc.o Modules/hashtable.o Modules/symtablemodule.o Modules/xxsubtype.o MODLIBS= $(LOCALMODLIBS) $(BASEMODLIBS) # === Variables set by configure VERSION= 3.6 srcdir= /builddir/build/BUILD/Python-3.6.8 VPATH= /builddir/build/BUILD/Python-3.6.8 abs_srcdir= /builddir/build/BUILD/Python-3.6.8 abs_builddir= /builddir/build/BUILD/Python-3.6.8/build/optimized CC= gcc -pthread CXX= g++ -pthread MAINCC= $(CC) LINKCC= gcc AR= ar READELF= readelf SOABI= cpython-36m-x86_64-linux-gnu LDVERSION= $(VERSION)$(ABIFLAGS) GITVERSION= GITTAG= GITBRANCH= PGO_PROF_GEN_FLAG=-fprofile-generate PGO_PROF_USE_FLAG=-fprofile-use -fprofile-correction LLVM_PROF_MERGER=true LLVM_PROF_FILE= LLVM_PROF_ERR=no DTRACE= /usr/bin/dtrace DFLAGS= DTRACE_HEADERS= Include/pydtrace_probes.h DTRACE_OBJS= Python/pydtrace.o GNULD= yes # Shell used by make (some versions default to the login shell, which is bad) SHELL= /bin/sh # Use this to make a link between python$(VERSION) and python in $(BINDIR) LN= ln # Portable install script (configure doesn't always guess right) INSTALL= /usr/bin/install -c INSTALL_PROGRAM=${INSTALL} INSTALL_SCRIPT= ${INSTALL} INSTALL_DATA= ${INSTALL} -m 644 # Shared libraries must be installed with executable mode on some systems; # rather than figuring out exactly which, we always give them executable mode. # Also, making them read-only seems to be a good idea... INSTALL_SHARED= ${INSTALL} -m 555 MKDIR_P= /usr/bin/mkdir -p MAKESETUP= $(srcdir)/Modules/makesetup # Compiler options OPT= -DDYNAMIC_ANNOTATIONS_ENABLED=1 -DNDEBUG -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -D_GNU_SOURCE -fPIC -fwrapv BASECFLAGS= -Wno-unused-result -Wsign-compare BASECPPFLAGS= -IObjects -IInclude -IPython CONFIGURE_CFLAGS= -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -D_GNU_SOURCE -fPIC -fwrapv # CFLAGS_NODIST is used for building the interpreter and stdlib C extensions. # Use it when a compiler flag should _not_ be part of the distutils CFLAGS # once Python is installed (Issue #21121). CONFIGURE_CFLAGS_NODIST=-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -D_GNU_SOURCE -fPIC -fwrapv -fno-semantic-interposition -flto -fuse-linker-plugin -ffat-lto-objects -flto-partition=none -g -std=c99 -Wextra -Wno-unused-result -Wno-unused-parameter -Wno-missing-field-initializers -Wno-cast-function-type # LDFLAGS_NODIST is used in the same manner as CFLAGS_NODIST. # Use it when a linker flag should _not_ be part of the distutils LDFLAGS # once Python is installed (bpo-35257) CONFIGURE_LDFLAGS_NODIST=-Wl,-z,relro -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -fno-semantic-interposition -g -flto -fuse-linker-plugin -ffat-lto-objects -flto-partition=none -g CONFIGURE_CPPFLAGS= CONFIGURE_LDFLAGS= -Wl,-z,relro -Wl,-z,now -g # Avoid assigning CFLAGS, LDFLAGS, etc. so users can use them on the # command line to append to these values without stomping the pre-set # values. PY_CFLAGS= $(BASECFLAGS) $(OPT) $(CONFIGURE_CFLAGS) $(CFLAGS) $(EXTRA_CFLAGS) PY_CFLAGS_NODIST=$(CONFIGURE_CFLAGS_NODIST) $(CFLAGS_NODIST) # Both CPPFLAGS and LDFLAGS need to contain the shell's value for setup.py to # be able to build extension modules using the directories specified in the # environment variables PY_CPPFLAGS= $(BASECPPFLAGS) -I. -I$(srcdir)/Include $(CONFIGURE_CPPFLAGS) $(CPPFLAGS) PY_LDFLAGS= $(CONFIGURE_LDFLAGS) $(LDFLAGS) PY_LDFLAGS_NODIST=$(CONFIGURE_LDFLAGS_NODIST) $(LDFLAGS_NODIST) NO_AS_NEEDED= -Wl,--no-as-needed LDLAST= SGI_ABI= CCSHARED= -fPIC LINKFORSHARED= -Xlinker -export-dynamic ARFLAGS= rcs # Extra C flags added for building the interpreter object files. CFLAGSFORSHARED=$(CCSHARED) # C flags used for building the interpreter object files PY_CORE_CFLAGS= $(PY_CFLAGS) $(PY_CFLAGS_NODIST) $(PY_CPPFLAGS) $(CFLAGSFORSHARED) -DPy_BUILD_CORE # Linker flags used for building the interpreter object files PY_CORE_LDFLAGS=$(PY_LDFLAGS) $(PY_LDFLAGS_NODIST) -lcrypto # Strict or non-strict aliasing flags used to compile dtoa.c, see above CFLAGS_ALIASING= # Machine-dependent subdirectories MACHDEP= linux # Multiarch directory (may be empty) MULTIARCH= x86_64-linux-gnu MULTIARCH_CPPFLAGS = -DMULTIARCH=\"x86_64-linux-gnu\" # Install prefix for architecture-independent files prefix= /usr # Install prefix for architecture-dependent files exec_prefix= /usr # Install prefix for data files datarootdir= ${prefix}/share # Expanded directories BINDIR= /usr/bin LIBDIR= /usr/lib64 MANDIR= /usr/share/man INCLUDEDIR= /usr/include CONFINCLUDEDIR= $(exec_prefix)/include SCRIPTDIR= $(prefix)/lib64 ABIFLAGS= m # Detailed destination directories BINLIBDEST= $(LIBDIR)/python$(VERSION) LIBDEST= $(SCRIPTDIR)/python$(VERSION) INCLUDEPY= $(INCLUDEDIR)/python$(LDVERSION) CONFINCLUDEPY= $(CONFINCLUDEDIR)/python$(LDVERSION) # Symbols used for using shared libraries SHLIB_SUFFIX= .so EXT_SUFFIX= .cpython-36m-x86_64-linux-gnu.so LDSHARED= $(CC) -shared $(PY_LDFLAGS) BLDSHARED= $(CC) -shared $(PY_CORE_LDFLAGS) LDCXXSHARED= $(CXX) -shared DESTSHARED= $(BINLIBDEST)/lib-dynload # Executable suffix (.exe on Windows and Mac OS X) EXE= BUILDEXE= # Short name and location for Mac OS X Python framework UNIVERSALSDK= PYTHONFRAMEWORK= PYTHONFRAMEWORKDIR= no-framework PYTHONFRAMEWORKPREFIX= PYTHONFRAMEWORKINSTALLDIR= # Deployment target selected during configure, to be checked # by distutils. The export statement is needed to ensure that the # deployment target is active during build. MACOSX_DEPLOYMENT_TARGET= #export MACOSX_DEPLOYMENT_TARGET # Option to install to strip binaries STRIPFLAG=-s # Flags to lipo to produce a 32-bit-only universal executable LIPO_32BIT_FLAGS= # Options to enable prebinding (for fast startup prior to Mac OS X 10.3) OTHER_LIBTOOL_OPT= # Environment to run shared python without installed libraries RUNSHARED= LD_LIBRARY_PATH=/builddir/build/BUILD/Python-3.6.8/build/optimized # ensurepip options ENSUREPIP= no # Modes for directories, executables and data files created by the # install process. Default to user-only-writable for all file types. DIRMODE= 755 EXEMODE= 755 FILEMODE= 644 # configure script arguments CONFIG_ARGS= '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--program-prefix=' '--disable-dependency-tracking' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/var/lib' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--enable-ipv6' '--enable-shared' '--with-computed-gotos=yes' '--with-dbmliborder=gdbm:ndbm:bdb' '--with-system-expat' '--with-system-ffi' '--enable-loadable-sqlite-extensions' '--with-dtrace' '--with-lto' '--with-ssl-default-suites=openssl' '--with-valgrind' '--without-ensurepip' '--enable-optimizations' 'build_alias=x86_64-redhat-linux-gnu' 'host_alias=x86_64-redhat-linux-gnu' 'CFLAGS= -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -D_GNU_SOURCE -fPIC -fwrapv ' 'LDFLAGS= -Wl,-z,relro -Wl,-z,now -g ' 'CPPFLAGS=' 'PKG_CONFIG_PATH=:/usr/lib64/pkgconfig:/usr/share/pkgconfig' # Subdirectories with code SRCDIRS= Parser Objects Python Modules Programs # Other subdirectories SUBDIRSTOO= Include Lib Misc # Files and directories to be distributed CONFIGFILES= configure configure.ac acconfig.h pyconfig.h.in Makefile.pre.in DISTFILES= README ChangeLog $(CONFIGFILES) DISTDIRS= $(SUBDIRS) $(SUBDIRSTOO) Ext-dummy DIST= $(DISTFILES) $(DISTDIRS) LIBRARY= libpython$(VERSION)$(ABIFLAGS).a LDLIBRARY= libpython$(LDVERSION).so BLDLIBRARY= -L. -lpython$(LDVERSION) PY3LIBRARY= libpython3.so DLLLIBRARY= LDLIBRARYDIR= INSTSONAME= libpython$(LDVERSION).so.1.0 LIBS= -lpthread -ldl -lutil LIBM= -lm LIBC= SYSLIBS= $(LIBM) $(LIBC) SHLIBS= $(LIBS) THREADOBJ= Python/thread.o DLINCLDIR= . DYNLOADFILE= dynload_shlib.o MACHDEP_OBJS= LIBOBJDIR= Python/ LIBOBJS= PYTHON= python$(EXE) BUILDPYTHON= python$(BUILDEXE) PYTHON_FOR_REGEN=python3.6 UPDATE_FILE=python3.6 $(srcdir)/Tools/scripts/update_file.py PYTHON_FOR_BUILD=./$(BUILDPYTHON) -E _PYTHON_HOST_PLATFORM= BUILD_GNU_TYPE= x86_64-redhat-linux-gnu HOST_GNU_TYPE= x86_64-redhat-linux-gnu # Tcl and Tk config info from --with-tcltk-includes and -libs options TCLTK_INCLUDES= TCLTK_LIBS= # The task to run while instrumented when building the profile-opt target. # To speed up profile generation, we don't run the full unit test suite # by default. The default is "-m test --pgo". To run more tests, use # PROFILE_TASK="-m test --pgo-extended" PROFILE_TASK= -m test --pgo # report files for gcov / lcov coverage report COVERAGE_INFO= $(abs_builddir)/coverage.info COVERAGE_REPORT=$(abs_builddir)/lcov-report COVERAGE_REPORT_OPTIONS=--no-branch-coverage --title "CPython lcov report" # === Definitions added by makesetup === LOCALMODLIBS= BASEMODLIBS= PYTHONPATH=$(COREPYTHONPATH) COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(EXTRAMACHDEPPATH) EXTRAMACHDEPPATH= MACHDEPPATH=:$(PLATDIR) TESTPATH= SITEPATH= DESTPATH= MACHDESTLIB=$(BINLIBDEST) DESTLIB=$(LIBDEST) ########################################################################## # Modules MODULE_OBJS= \ Modules/config.o \ Modules/getpath.o \ Modules/main.o \ Modules/gcmodule.o IO_H= Modules/_io/_iomodule.h IO_OBJS= \ Modules/_io/_iomodule.o \ Modules/_io/iobase.o \ Modules/_io/fileio.o \ Modules/_io/bufferedio.o \ Modules/_io/textio.o \ Modules/_io/bytesio.o \ Modules/_io/stringio.o ########################################################################## LIBFFI_INCLUDEDIR= ########################################################################## # Parser PGEN= Parser/pgen$(EXE) POBJS= \ Parser/acceler.o \ Parser/grammar1.o \ Parser/listnode.o \ Parser/node.o \ Parser/parser.o \ Parser/bitset.o \ Parser/metagrammar.o \ Parser/firstsets.o \ Parser/grammar.o \ Parser/pgen.o PARSER_OBJS= $(POBJS) Parser/myreadline.o Parser/parsetok.o Parser/tokenizer.o PGOBJS= \ Objects/obmalloc.o \ Python/dynamic_annotations.o \ Python/mysnprintf.o \ Python/pyctype.o \ Parser/tokenizer_pgen.o \ Parser/printgrammar.o \ Parser/parsetok_pgen.o \ Parser/pgenmain.o PARSER_HEADERS= \ $(srcdir)/Parser/parser.h \ $(srcdir)/Include/parsetok.h \ $(srcdir)/Parser/tokenizer.h PGENOBJS= $(POBJS) $(PGOBJS) ########################################################################## # Python PYTHON_OBJS= \ Python/_warnings.o \ Python/Python-ast.o \ Python/asdl.o \ Python/ast.o \ Python/bltinmodule.o \ Python/ceval.o \ Python/compile.o \ Python/codecs.o \ Python/dynamic_annotations.o \ Python/errors.o \ Python/frozenmain.o \ Python/future.o \ Python/getargs.o \ Python/getcompiler.o \ Python/getcopyright.o \ Python/getplatform.o \ Python/getversion.o \ Python/graminit.o \ Python/import.o \ Python/importdl.o \ Python/marshal.o \ Python/modsupport.o \ Python/mystrtoul.o \ Python/mysnprintf.o \ Python/peephole.o \ Python/pyarena.o \ Python/pyctype.o \ Python/pyfpe.o \ Python/pyhash.o \ Python/pylifecycle.o \ Python/pymath.o \ Python/pystate.o \ Python/pythonrun.o \ Python/pytime.o \ Python/random.o \ Python/structmember.o \ Python/symtable.o \ Python/sysmodule.o \ Python/traceback.o \ Python/getopt.o \ Python/pystrcmp.o \ Python/pystrtod.o \ Python/pystrhex.o \ Python/dtoa.o \ Python/formatter_unicode.o \ Python/fileutils.o \ Python/$(DYNLOADFILE) \ $(LIBOBJS) \ $(MACHDEP_OBJS) \ $(THREADOBJ) \ $(DTRACE_OBJS) ########################################################################## # Objects OBJECT_OBJS= \ Objects/abstract.o \ Objects/accu.o \ Objects/boolobject.o \ Objects/bytes_methods.o \ Objects/bytearrayobject.o \ Objects/bytesobject.o \ Objects/cellobject.o \ Objects/classobject.o \ Objects/codeobject.o \ Objects/complexobject.o \ Objects/descrobject.o \ Objects/enumobject.o \ Objects/exceptions.o \ Objects/genobject.o \ Objects/fileobject.o \ Objects/floatobject.o \ Objects/frameobject.o \ Objects/funcobject.o \ Objects/iterobject.o \ Objects/listobject.o \ Objects/longobject.o \ Objects/dictobject.o \ Objects/odictobject.o \ Objects/memoryobject.o \ Objects/methodobject.o \ Objects/moduleobject.o \ Objects/namespaceobject.o \ Objects/object.o \ Objects/obmalloc.o \ Objects/capsule.o \ Objects/rangeobject.o \ Objects/setobject.o \ Objects/sliceobject.o \ Objects/structseq.o \ Objects/tupleobject.o \ Objects/typeobject.o \ Objects/unicodeobject.o \ Objects/unicodectype.o \ Objects/weakrefobject.o ########################################################################## # objects that get linked into the Python library LIBRARY_OBJS_OMIT_FROZEN= \ Modules/getbuildinfo.o \ $(PARSER_OBJS) \ $(OBJECT_OBJS) \ $(PYTHON_OBJS) \ $(MODULE_OBJS) \ $(MODOBJS) LIBRARY_OBJS= \ $(LIBRARY_OBJS_OMIT_FROZEN) \ Python/frozen.o ########################################################################## # DTrace # On some systems, object files that reference DTrace probes need to be modified # in-place by dtrace(1). DTRACE_DEPS = \ Python/ceval.o # XXX: should gcmodule, etc. be here, too? ######################################################################### # Rules # Default target all: profile-opt build_all: check-clean-src $(BUILDPYTHON) oldsharedmods sharedmods gdbhooks \ Programs/_testembed python-config # Check that the source is clean when building out of source. check-clean-src: @if test -n "$(VPATH)" -a -f "$(srcdir)/Programs/python.o"; then \ echo "Error: The source directory ($(srcdir)) is not clean" ; \ echo "Building Python out of the source tree (in $(abs_builddir)) requires a clean source tree ($(abs_srcdir))" ; \ echo "Try to run: make -C \"$(srcdir)\" clean" ; \ exit 1; \ fi # Compile a binary with profile guided optimization. profile-opt: @if [ $(LLVM_PROF_ERR) = yes ]; then \ echo "Error: Cannot perform PGO build because llvm-profdata was not found in PATH" ;\ echo "Please add it to PATH and run ./configure again" ;\ exit 1;\ fi @echo "Building with support for profile generation:" $(MAKE) clean $(MAKE) profile-removal $(MAKE) build_all_generate_profile $(MAKE) profile-removal @echo "Running code to generate profile data (this can take a while):" $(MAKE) run_profile_task $(MAKE) build_all_merge_profile @echo "Rebuilding with profile guided optimizations:" $(MAKE) clean $(MAKE) build_all_use_profile $(MAKE) profile-removal build_all_generate_profile: $(MAKE) build_all CFLAGS_NODIST="$(CFLAGS_NODIST) $(PGO_PROF_GEN_FLAG)" LDFLAGS_NODIST="$(LDFLAGS_NODIST) $(PGO_PROF_GEN_FLAG)" LIBS="$(LIBS)" run_profile_task: : # FIXME: can't run for a cross build $(LLVM_PROF_FILE) $(RUNSHARED) ./$(BUILDPYTHON) $(PROFILE_TASK) || true build_all_merge_profile: $(LLVM_PROF_MERGER) build_all_use_profile: $(MAKE) build_all CFLAGS_NODIST="$(CFLAGS_NODIST) $(PGO_PROF_USE_FLAG)" LDFLAGS_NODIST="$(LDFLAGS_NODIST)" # Compile and run with gcov .PHONY=coverage coverage-lcov coverage-report coverage: @echo "Building with support for coverage checking:" $(MAKE) clean profile-removal $(MAKE) build_all CFLAGS="$(CFLAGS) -O0 -pg -fprofile-arcs -ftest-coverage" LIBS="$(LIBS) -lgcov" coverage-lcov: @echo "Creating Coverage HTML report with LCOV:" @rm -f $(COVERAGE_INFO) @rm -rf $(COVERAGE_REPORT) @lcov --capture --directory $(abs_builddir) \ --base-directory $(realpath $(abs_builddir)) \ --path $(realpath $(abs_srcdir)) \ --output-file $(COVERAGE_INFO) : # remove 3rd party modules, system headers and internal files with : # debug, test or dummy functions. @lcov --remove $(COVERAGE_INFO) \ '*/Modules/_blake2/impl/*' \ '*/Modules/_ctypes/libffi*/*' \ '*/Modules/_decimal/libmpdec/*' \ '*/Modules/_sha3/kcp/*' \ '*/Modules/expat/*' \ '*/Modules/zlib/*' \ '*/Include/*' \ '*/Modules/xx*.c' \ '*/Parser/listnode.c' \ '*/Python/pyfpe.c' \ '*/Python/pystrcmp.c' \ '/usr/include/*' \ '/usr/local/include/*' \ '/usr/lib/gcc/*' \ --output-file $(COVERAGE_INFO) @genhtml $(COVERAGE_INFO) --output-directory $(COVERAGE_REPORT) \ $(COVERAGE_REPORT_OPTIONS) @echo @echo "lcov report at $(COVERAGE_REPORT)/index.html" @echo # Force regeneration of parser and importlib coverage-report: regen-grammar regen-importlib : # force rebuilding of parser and importlib @touch $(GRAMMAR_INPUT) @touch $(srcdir)/Lib/importlib/_bootstrap.py @touch $(srcdir)/Lib/importlib/_bootstrap_external.py : # build with coverage info $(MAKE) coverage : # run tests, ignore failures $(TESTRUNNER) $(TESTOPTS) || true : # build lcov report $(MAKE) coverage-lcov # Run "Argument Clinic" over all source files .PHONY=clinic clinic: check-clean-src $(srcdir)/Modules/_blake2/blake2s_impl.c $(PYTHON_FOR_REGEN) ./Tools/clinic/clinic.py --make # Build the interpreter $(BUILDPYTHON): Programs/python.o $(LDLIBRARY) $(PY3LIBRARY) $(LINKCC) $(PY_CORE_LDFLAGS) $(LINKFORSHARED) -o $@ Programs/python.o $(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST) platform: $(BUILDPYTHON) pybuilddir.txt $(RUNSHARED) $(PYTHON_FOR_BUILD) -c 'import sys ; from sysconfig import get_platform ; print("%s-%d.%d" % (get_platform(), *sys.version_info[:2]))' >platform # Create build directory and generate the sysconfig build-time data there. # pybuilddir.txt contains the name of the build dir and is used for # sys.path fixup -- see Modules/getpath.c. # Since this step runs before shared modules are built, try to avoid bootstrap # problems by creating a dummy pybuilddir.txt just to allow interpreter # initialization to succeed. It will be overwritten by generate-posix-vars # or removed in case of failure. pybuilddir.txt: $(BUILDPYTHON) @echo "none" > ./pybuilddir.txt $(RUNSHARED) $(PYTHON_FOR_BUILD) -S -m sysconfig --generate-posix-vars ;\ if test $$? -ne 0 ; then \ echo "generate-posix-vars failed" ; \ rm -f ./pybuilddir.txt ; \ exit 1 ; \ fi # This is shared by the math and cmath modules Modules/_math.o: Modules/_math.c Modules/_math.h $(CC) -c $(CCSHARED) $(PY_CORE_CFLAGS) -o $@ $< # blake2s is auto-generated from blake2b $(srcdir)/Modules/_blake2/blake2s_impl.c: $(srcdir)/Modules/_blake2/blake2b_impl.c $(srcdir)/Modules/_blake2/blake2b2s.py $(PYTHON_FOR_REGEN) $(srcdir)/Modules/_blake2/blake2b2s.py $(PYTHON_FOR_REGEN) $(srcdir)/Tools/clinic/clinic.py -f $@ # Build the shared modules # Under GNU make, MAKEFLAGS are sorted and normalized; the 's' for # -s, --silent or --quiet is always the first char. # Under BSD make, MAKEFLAGS might be " -s -v x=y". # Ignore macros passed by GNU make, passed after -- sharedmods: $(BUILDPYTHON) pybuilddir.txt Modules/_math.o @case "`echo X $$MAKEFLAGS | sed 's/^X //;s/ -- .*//'`" in \ *\ -s*|s*) quiet="-q";; \ *) quiet="";; \ esac; \ echo "$(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' \ _TCLTK_INCLUDES='$(TCLTK_INCLUDES)' _TCLTK_LIBS='$(TCLTK_LIBS)' \ $(PYTHON_FOR_BUILD) $(srcdir)/setup.py $$quiet build"; \ $(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' \ _TCLTK_INCLUDES='$(TCLTK_INCLUDES)' _TCLTK_LIBS='$(TCLTK_LIBS)' \ $(PYTHON_FOR_BUILD) $(srcdir)/setup.py $$quiet build libpython$(LDVERSION).so: $(LIBRARY_OBJS) if test $(INSTSONAME) != $(LDLIBRARY); then \ $(BLDSHARED) -Wl,-h$(INSTSONAME) -o $(INSTSONAME) $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \ $(LN) -f $(INSTSONAME) $@; \ else \ $(BLDSHARED) -o $@ $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \ fi libpython3.so: libpython$(LDVERSION).so $(BLDSHARED) $(NO_AS_NEEDED) -o $@ -Wl,-h$@ $^ libpython$(LDVERSION).dylib: $(LIBRARY_OBJS) $(CC) -dynamiclib -Wl,-single_module $(PY_CORE_LDFLAGS) -undefined dynamic_lookup -Wl,-install_name,$(prefix)/lib/libpython$(LDVERSION).dylib -Wl,-compatibility_version,$(VERSION) -Wl,-current_version,$(VERSION) -o $@ $(LIBRARY_OBJS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \ libpython$(VERSION).sl: $(LIBRARY_OBJS) $(LDSHARED) -o $@ $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST) # Copy up the gdb python hooks into a position where they can be automatically # loaded by gdb during Lib/test/test_gdb.py # # Distributors are likely to want to install this somewhere else e.g. relative # to the stripped DWARF data for the shared library. gdbhooks: $(BUILDPYTHON)-gdb.py SRC_GDB_HOOKS=$(srcdir)/Tools/gdb/libpython.py $(BUILDPYTHON)-gdb.py: $(SRC_GDB_HOOKS) $(INSTALL_DATA) $(SRC_GDB_HOOKS) $(BUILDPYTHON)-gdb.py # This rule is here for OPENSTEP/Rhapsody/MacOSX. It builds a temporary # minimal framework (not including the Lib directory and such) in the current # directory. RESSRCDIR=Mac/Resources/framework $(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK): \ $(LIBRARY) \ $(RESSRCDIR)/Info.plist $(INSTALL) -d -m $(DIRMODE) $(PYTHONFRAMEWORKDIR)/Versions/$(VERSION) $(CC) -o $(LDLIBRARY) $(PY_CORE_LDFLAGS) -dynamiclib \ -all_load $(LIBRARY) -Wl,-single_module \ -install_name $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK) \ -compatibility_version $(VERSION) \ -current_version $(VERSION) \ -framework CoreFoundation $(LIBS); $(INSTALL) -d -m $(DIRMODE) \ $(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/Resources/English.lproj $(INSTALL_DATA) $(RESSRCDIR)/Info.plist \ $(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/Resources/Info.plist $(LN) -fsn $(VERSION) $(PYTHONFRAMEWORKDIR)/Versions/Current $(LN) -fsn Versions/Current/$(PYTHONFRAMEWORK) $(PYTHONFRAMEWORKDIR)/$(PYTHONFRAMEWORK) $(LN) -fsn Versions/Current/Resources $(PYTHONFRAMEWORKDIR)/Resources # This rule builds the Cygwin Python DLL and import library if configured # for a shared core library; otherwise, this rule is a noop. $(DLLLIBRARY) libpython$(VERSION).dll.a: $(LIBRARY_OBJS) if test -n "$(DLLLIBRARY)"; then \ $(LDSHARED) -Wl,--out-implib=$@ -o $(DLLLIBRARY) $^ \ $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST); \ else true; \ fi oldsharedmods: $(SHAREDMODS) Makefile Modules/config.c: Makefile.pre \ $(srcdir)/Modules/config.c.in \ $(MAKESETUP) \ Modules/Setup.config \ Modules/Setup \ Modules/Setup.local $(SHELL) $(MAKESETUP) -c $(srcdir)/Modules/config.c.in \ -s Modules \ Modules/Setup.config \ Modules/Setup.local \ Modules/Setup @mv config.c Modules @echo "The Makefile was updated, you may need to re-run make." Modules/Setup: $(srcdir)/Modules/Setup.dist @if test -f Modules/Setup; then \ echo "-----------------------------------------------"; \ echo "Modules/Setup.dist is newer than Modules/Setup;"; \ echo "check to make sure you have all the updates you"; \ echo "need in your Modules/Setup file."; \ echo "Usually, copying Modules/Setup.dist to Modules/Setup will work."; \ echo "-----------------------------------------------"; \ fi Programs/_testembed: Programs/_testembed.o $(LDLIBRARY) $(PY3LIBRARY) $(LINKCC) $(PY_CORE_LDFLAGS) $(LINKFORSHARED) -o $@ Programs/_testembed.o $(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST) ############################################################################ # Importlib Programs/_freeze_importlib.o: Programs/_freeze_importlib.c Makefile Programs/_freeze_importlib: Programs/_freeze_importlib.o $(LIBRARY_OBJS_OMIT_FROZEN) $(LINKCC) $(PY_CORE_LDFLAGS) -o $@ Programs/_freeze_importlib.o $(LIBRARY_OBJS_OMIT_FROZEN) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST) .PHONY: regen-importlib regen-importlib: Programs/_freeze_importlib # Regenerate Python/importlib_external.h # from Lib/importlib/_bootstrap_external.py using _freeze_importlib ./Programs/_freeze_importlib \ $(srcdir)/Lib/importlib/_bootstrap_external.py \ $(srcdir)/Python/importlib_external.h.new $(UPDATE_FILE) $(srcdir)/Python/importlib_external.h $(srcdir)/Python/importlib_external.h.new # Regenerate Python/importlib.h from Lib/importlib/_bootstrap.py # using _freeze_importlib ./Programs/_freeze_importlib \ $(srcdir)/Lib/importlib/_bootstrap.py \ $(srcdir)/Python/importlib.h.new $(UPDATE_FILE) $(srcdir)/Python/importlib.h $(srcdir)/Python/importlib.h.new ############################################################################ # Regenerate all generated files regen-all: regen-opcode regen-opcode-targets regen-typeslots regen-grammar \ regen-ast regen-importlib clinic ############################################################################ # Special rules for object files Modules/getbuildinfo.o: $(PARSER_OBJS) \ $(OBJECT_OBJS) \ $(PYTHON_OBJS) \ $(MODULE_OBJS) \ $(MODOBJS) \ $(srcdir)/Modules/getbuildinfo.c $(CC) -c $(PY_CORE_CFLAGS) \ -DGITVERSION="\"`LC_ALL=C $(GITVERSION)`\"" \ -DGITTAG="\"`LC_ALL=C $(GITTAG)`\"" \ -DGITBRANCH="\"`LC_ALL=C $(GITBRANCH)`\"" \ -o $@ $(srcdir)/Modules/getbuildinfo.c Modules/getpath.o: $(srcdir)/Modules/getpath.c Makefile $(CC) -c $(PY_CORE_CFLAGS) -DPYTHONPATH='"$(PYTHONPATH)"' \ -DPREFIX='"$(prefix)"' \ -DEXEC_PREFIX='"$(exec_prefix)"' \ -DVERSION='"$(VERSION)"' \ -DVPATH='"$(VPATH)"' \ -o $@ $(srcdir)/Modules/getpath.c Programs/python.o: $(srcdir)/Programs/python.c $(MAINCC) -c $(PY_CORE_CFLAGS) -o $@ $(srcdir)/Programs/python.c Programs/_testembed.o: $(srcdir)/Programs/_testembed.c $(MAINCC) -c $(PY_CORE_CFLAGS) -o $@ $(srcdir)/Programs/_testembed.c Modules/_sre.o: $(srcdir)/Modules/_sre.c $(srcdir)/Modules/sre.h $(srcdir)/Modules/sre_constants.h $(srcdir)/Modules/sre_lib.h Modules/posixmodule.o: $(srcdir)/Modules/posixmodule.c $(srcdir)/Modules/posixmodule.h Modules/grpmodule.o: $(srcdir)/Modules/grpmodule.c $(srcdir)/Modules/posixmodule.h Modules/pwdmodule.o: $(srcdir)/Modules/pwdmodule.c $(srcdir)/Modules/posixmodule.h Modules/signalmodule.o: $(srcdir)/Modules/signalmodule.c $(srcdir)/Modules/posixmodule.h Python/dynload_shlib.o: $(srcdir)/Python/dynload_shlib.c Makefile $(CC) -c $(PY_CORE_CFLAGS) \ -DSOABI='"$(SOABI)"' \ -o $@ $(srcdir)/Python/dynload_shlib.c Python/dynload_hpux.o: $(srcdir)/Python/dynload_hpux.c Makefile $(CC) -c $(PY_CORE_CFLAGS) \ -DSHLIB_EXT='"$(EXT_SUFFIX)"' \ -o $@ $(srcdir)/Python/dynload_hpux.c Python/sysmodule.o: $(srcdir)/Python/sysmodule.c Makefile $(CC) -c $(PY_CORE_CFLAGS) \ -DABIFLAGS='"$(ABIFLAGS)"' \ $(MULTIARCH_CPPFLAGS) \ -o $@ $(srcdir)/Python/sysmodule.c $(IO_OBJS): $(IO_H) $(PGEN): $(PGENOBJS) $(CC) $(OPT) $(PY_CORE_LDFLAGS) $(PGENOBJS) $(LIBS) -o $(PGEN) .PHONY: regen-grammar regen-grammar: $(PGEN) # Regenerate Include/graminit.h and Python/graminit.c # from Grammar/Grammar using pgen @$(MKDIR_P) Include $(PGEN) $(srcdir)/Grammar/Grammar \ $(srcdir)/Include/graminit.h.new \ $(srcdir)/Python/graminit.c.new $(UPDATE_FILE) $(srcdir)/Include/graminit.h $(srcdir)/Include/graminit.h.new $(UPDATE_FILE) $(srcdir)/Python/graminit.c $(srcdir)/Python/graminit.c.new Parser/grammar.o: $(srcdir)/Parser/grammar.c \ $(srcdir)/Include/token.h \ $(srcdir)/Include/grammar.h Parser/metagrammar.o: $(srcdir)/Parser/metagrammar.c Parser/tokenizer_pgen.o: $(srcdir)/Parser/tokenizer.c Parser/parsetok_pgen.o: $(srcdir)/Parser/parsetok.c Parser/printgrammar.o: $(srcdir)/Parser/printgrammar.c Parser/pgenmain.o: $(srcdir)/Include/parsetok.h .PHONY=regen-ast regen-ast: # Regenerate Include/Python-ast.h using Parser/asdl_c.py -h $(MKDIR_P) $(srcdir)/Include $(PYTHON_FOR_REGEN) $(srcdir)/Parser/asdl_c.py \ -h $(srcdir)/Include/Python-ast.h.new \ $(srcdir)/Parser/Python.asdl $(UPDATE_FILE) $(srcdir)/Include/Python-ast.h $(srcdir)/Include/Python-ast.h.new # Regenerate Python/Python-ast.c using Parser/asdl_c.py -c $(MKDIR_P) $(srcdir)/Python $(PYTHON_FOR_REGEN) $(srcdir)/Parser/asdl_c.py \ -c $(srcdir)/Python/Python-ast.c.new \ $(srcdir)/Parser/Python.asdl $(UPDATE_FILE) $(srcdir)/Python/Python-ast.c $(srcdir)/Python/Python-ast.c.new .PHONY: regen-opcode regen-opcode: # Regenerate Include/opcode.h from Lib/opcode.py # using Tools/scripts/generate_opcode_h.py $(PYTHON_FOR_REGEN) $(srcdir)/Tools/scripts/generate_opcode_h.py \ $(srcdir)/Lib/opcode.py \ $(srcdir)/Include/opcode.h.new $(UPDATE_FILE) $(srcdir)/Include/opcode.h $(srcdir)/Include/opcode.h.new Python/compile.o Python/symtable.o Python/ast.o: $(srcdir)/Include/graminit.h $(srcdir)/Include/Python-ast.h Python/getplatform.o: $(srcdir)/Python/getplatform.c $(CC) -c $(PY_CORE_CFLAGS) -DPLATFORM='"$(MACHDEP)"' -o $@ $(srcdir)/Python/getplatform.c Python/importdl.o: $(srcdir)/Python/importdl.c $(CC) -c $(PY_CORE_CFLAGS) -I$(DLINCLDIR) -o $@ $(srcdir)/Python/importdl.c Objects/unicodectype.o: $(srcdir)/Objects/unicodectype.c \ $(srcdir)/Objects/unicodetype_db.h BYTESTR_DEPS = \ $(srcdir)/Objects/stringlib/count.h \ $(srcdir)/Objects/stringlib/ctype.h \ $(srcdir)/Objects/stringlib/fastsearch.h \ $(srcdir)/Objects/stringlib/find.h \ $(srcdir)/Objects/stringlib/join.h \ $(srcdir)/Objects/stringlib/partition.h \ $(srcdir)/Objects/stringlib/split.h \ $(srcdir)/Objects/stringlib/stringdefs.h \ $(srcdir)/Objects/stringlib/transmogrify.h UNICODE_DEPS = \ $(srcdir)/Objects/stringlib/asciilib.h \ $(srcdir)/Objects/stringlib/codecs.h \ $(srcdir)/Objects/stringlib/count.h \ $(srcdir)/Objects/stringlib/fastsearch.h \ $(srcdir)/Objects/stringlib/find.h \ $(srcdir)/Objects/stringlib/find_max_char.h \ $(srcdir)/Objects/stringlib/localeutil.h \ $(srcdir)/Objects/stringlib/partition.h \ $(srcdir)/Objects/stringlib/replace.h \ $(srcdir)/Objects/stringlib/split.h \ $(srcdir)/Objects/stringlib/ucs1lib.h \ $(srcdir)/Objects/stringlib/ucs2lib.h \ $(srcdir)/Objects/stringlib/ucs4lib.h \ $(srcdir)/Objects/stringlib/undef.h \ $(srcdir)/Objects/stringlib/unicode_format.h \ $(srcdir)/Objects/stringlib/unicodedefs.h Objects/bytes_methods.o: $(srcdir)/Objects/bytes_methods.c $(BYTESTR_DEPS) Objects/bytesobject.o: $(srcdir)/Objects/bytesobject.c $(BYTESTR_DEPS) Objects/bytearrayobject.o: $(srcdir)/Objects/bytearrayobject.c $(BYTESTR_DEPS) Objects/unicodeobject.o: $(srcdir)/Objects/unicodeobject.c $(UNICODE_DEPS) Objects/odictobject.o: $(srcdir)/Objects/dict-common.h Objects/dictobject.o: $(srcdir)/Objects/stringlib/eq.h $(srcdir)/Objects/dict-common.h Objects/setobject.o: $(srcdir)/Objects/stringlib/eq.h .PHONY: regen-opcode-targets regen-opcode-targets: # Regenerate Python/opcode_targets.h from Lib/opcode.py # using Python/makeopcodetargets.py $(PYTHON_FOR_REGEN) $(srcdir)/Python/makeopcodetargets.py \ $(srcdir)/Python/opcode_targets.h.new $(UPDATE_FILE) $(srcdir)/Python/opcode_targets.h $(srcdir)/Python/opcode_targets.h.new Python/ceval.o: $(srcdir)/Python/opcode_targets.h $(srcdir)/Python/ceval_gil.h \ $(srcdir)/Python/condvar.h Python/frozen.o: $(srcdir)/Python/importlib.h $(srcdir)/Python/importlib_external.h # Generate DTrace probe macros, then rename them (PYTHON_ -> PyDTrace_) to # follow our naming conventions. dtrace(1) uses the output filename to generate # an include guard, so we can't use a pipeline to transform its output. Include/pydtrace_probes.h: $(srcdir)/Include/pydtrace.d $(MKDIR_P) Include $(DTRACE) $(DFLAGS) -o $@ -h -s $< : sed in-place edit with POSIX-only tools sed 's/PYTHON_/PyDTrace_/' $@ > $@.tmp mv $@.tmp $@ Python/pydtrace.o: $(srcdir)/Include/pydtrace.d $(DTRACE_DEPS) $(DTRACE) $(DFLAGS) -o $@ -G -s $< $(DTRACE_DEPS) Objects/typeobject.o: Objects/typeslots.inc .PHONY: regen-typeslots regen-typeslots: # Regenerate Objects/typeslots.inc from Include/typeslotsh # using Objects/typeslots.py $(PYTHON_FOR_REGEN) $(srcdir)/Objects/typeslots.py \ < $(srcdir)/Include/typeslots.h \ $(srcdir)/Objects/typeslots.inc.new $(UPDATE_FILE) $(srcdir)/Objects/typeslots.inc $(srcdir)/Objects/typeslots.inc.new ############################################################################ # Header files PYTHON_HEADERS= \ $(srcdir)/Include/Python.h \ $(srcdir)/Include/abstract.h \ $(srcdir)/Include/accu.h \ $(srcdir)/Include/asdl.h \ $(srcdir)/Include/ast.h \ $(srcdir)/Include/bltinmodule.h \ $(srcdir)/Include/bitset.h \ $(srcdir)/Include/boolobject.h \ $(srcdir)/Include/bytes_methods.h \ $(srcdir)/Include/bytearrayobject.h \ $(srcdir)/Include/bytesobject.h \ $(srcdir)/Include/cellobject.h \ $(srcdir)/Include/ceval.h \ $(srcdir)/Include/classobject.h \ $(srcdir)/Include/code.h \ $(srcdir)/Include/codecs.h \ $(srcdir)/Include/compile.h \ $(srcdir)/Include/complexobject.h \ $(srcdir)/Include/descrobject.h \ $(srcdir)/Include/dictobject.h \ $(srcdir)/Include/dtoa.h \ $(srcdir)/Include/dynamic_annotations.h \ $(srcdir)/Include/enumobject.h \ $(srcdir)/Include/errcode.h \ $(srcdir)/Include/eval.h \ $(srcdir)/Include/fileobject.h \ $(srcdir)/Include/fileutils.h \ $(srcdir)/Include/floatobject.h \ $(srcdir)/Include/frameobject.h \ $(srcdir)/Include/funcobject.h \ $(srcdir)/Include/genobject.h \ $(srcdir)/Include/import.h \ $(srcdir)/Include/intrcheck.h \ $(srcdir)/Include/iterobject.h \ $(srcdir)/Include/listobject.h \ $(srcdir)/Include/longintrepr.h \ $(srcdir)/Include/longobject.h \ $(srcdir)/Include/marshal.h \ $(srcdir)/Include/memoryobject.h \ $(srcdir)/Include/metagrammar.h \ $(srcdir)/Include/methodobject.h \ $(srcdir)/Include/modsupport.h \ $(srcdir)/Include/moduleobject.h \ $(srcdir)/Include/namespaceobject.h \ $(srcdir)/Include/node.h \ $(srcdir)/Include/object.h \ $(srcdir)/Include/objimpl.h \ $(srcdir)/Include/opcode.h \ $(srcdir)/Include/osdefs.h \ $(srcdir)/Include/osmodule.h \ $(srcdir)/Include/patchlevel.h \ $(srcdir)/Include/pgen.h \ $(srcdir)/Include/pgenheaders.h \ $(srcdir)/Include/pyarena.h \ $(srcdir)/Include/pyatomic.h \ $(srcdir)/Include/pycapsule.h \ $(srcdir)/Include/pyctype.h \ $(srcdir)/Include/pydebug.h \ $(srcdir)/Include/pydtrace.h \ $(srcdir)/Include/pyerrors.h \ $(srcdir)/Include/pyfpe.h \ $(srcdir)/Include/pyhash.h \ $(srcdir)/Include/pylifecycle.h \ $(srcdir)/Include/pymath.h \ $(srcdir)/Include/pygetopt.h \ $(srcdir)/Include/pymacro.h \ $(srcdir)/Include/pymem.h \ $(srcdir)/Include/pyport.h \ $(srcdir)/Include/pystate.h \ $(srcdir)/Include/pystrcmp.h \ $(srcdir)/Include/pystrtod.h \ $(srcdir)/Include/pystrhex.h \ $(srcdir)/Include/pythonrun.h \ $(srcdir)/Include/pythread.h \ $(srcdir)/Include/pytime.h \ $(srcdir)/Include/rangeobject.h \ $(srcdir)/Include/setobject.h \ $(srcdir)/Include/sliceobject.h \ $(srcdir)/Include/structmember.h \ $(srcdir)/Include/structseq.h \ $(srcdir)/Include/symtable.h \ $(srcdir)/Include/sysmodule.h \ $(srcdir)/Include/traceback.h \ $(srcdir)/Include/tupleobject.h \ $(srcdir)/Include/ucnhash.h \ $(srcdir)/Include/unicodeobject.h \ $(srcdir)/Include/warnings.h \ $(srcdir)/Include/weakrefobject.h \ pyconfig.h \ $(PARSER_HEADERS) \ $(srcdir)/Include/Python-ast.h \ $(DTRACE_HEADERS) $(LIBRARY_OBJS) $(MODOBJS) Programs/python.o: $(PYTHON_HEADERS) ###################################################################### TESTOPTS= $(EXTRATESTOPTS) TESTPYTHON= $(RUNSHARED) ./$(BUILDPYTHON) $(TESTPYTHONOPTS) TESTRUNNER= $(TESTPYTHON) $(srcdir)/Tools/scripts/run_tests.py TESTTIMEOUT= 1200 .PHONY: test testall testuniversal buildbottest pythoninfo # Run a basic set of regression tests. # This excludes some tests that are particularly resource-intensive. test: build_all platform $(TESTRUNNER) $(TESTOPTS) # Run the full test suite twice - once without .pyc files, and once with. # In the past, we've had problems where bugs in the marshalling or # elsewhere caused bytecode read from .pyc files to behave differently # than bytecode generated directly from a .py source file. Sometimes # the bytecode read from a .pyc file had the bug, sometimes the directly # generated bytecode. This is sometimes a very shy bug needing a lot of # sample data. testall: build_all platform -find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f $(TESTPYTHON) -E $(srcdir)/Lib/compileall.py -find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f -$(TESTRUNNER) -u all $(TESTOPTS) $(TESTRUNNER) -u all $(TESTOPTS) # Run the test suite for both architectures in a Universal build on OSX. # Must be run on an Intel box. testuniversal: build_all platform if [ `arch` != 'i386' ];then \ echo "This can only be used on OSX/i386" ;\ exit 1 ;\ fi $(TESTRUNNER) -u all $(TESTOPTS) $(RUNSHARED) /usr/libexec/oah/translate \ ./$(BUILDPYTHON) -E -m test -j 0 -u all $(TESTOPTS) # Like testall, but with only one pass and without multiple processes. # Run an optional script to include information about the build environment. buildbottest: build_all platform -@if which pybuildbot.identify >/dev/null 2>&1; then \ pybuildbot.identify "CC='$(CC)'" "CXX='$(CXX)'"; \ fi $(TESTRUNNER) -j 1 -u all -W --slowest --timeout=$(TESTTIMEOUT) $(TESTOPTS) pythoninfo: build_all $(RUNSHARED) ./$(BUILDPYTHON) -m test.pythoninfo QUICKTESTOPTS= $(TESTOPTS) -x test_subprocess test_io test_lib2to3 \ test_multibytecodec test_urllib2_localnet test_itertools \ test_multiprocessing_fork test_multiprocessing_spawn \ test_multiprocessing_forkserver \ test_mailbox test_socket test_poll \ test_select test_zipfile test_concurrent_futures quicktest: build_all platform $(TESTRUNNER) $(QUICKTESTOPTS) # SSL tests .PHONY: multisslcompile multissltest multisslcompile: build_all $(RUNSHARED) ./$(BUILDPYTHON) Tools/ssl/multissltests.py --compile-only multissltest: build_all $(RUNSHARED) ./$(BUILDPYTHON) Tools/ssl/multissltests.py install: commoninstall bininstall maninstall if test "x$(ENSUREPIP)" != "xno" ; then \ case $(ENSUREPIP) in \ upgrade) ensurepip="--upgrade" ;; \ install|*) ensurepip="" ;; \ esac; \ $(RUNSHARED) $(PYTHON_FOR_BUILD) -m ensurepip \ $$ensurepip --root=$(DESTDIR)/ ; \ fi altinstall: commoninstall if test "x$(ENSUREPIP)" != "xno" ; then \ case $(ENSUREPIP) in \ upgrade) ensurepip="--altinstall --upgrade" ;; \ install|*) ensurepip="--altinstall" ;; \ esac; \ $(RUNSHARED) $(PYTHON_FOR_BUILD) -m ensurepip \ $$ensurepip --root=$(DESTDIR)/ ; \ fi commoninstall: check-clean-src \ altbininstall libinstall inclinstall libainstall \ sharedinstall oldsharedinstall altmaninstall \ # Install shared libraries enabled by Setup DESTDIRS= $(exec_prefix) $(LIBDIR) $(BINLIBDEST) $(DESTSHARED) oldsharedinstall: $(DESTSHARED) $(SHAREDMODS) @for i in X $(SHAREDMODS); do \ if test $$i != X; then \ echo $(INSTALL_SHARED) $$i $(DESTSHARED)/`basename $$i`; \ $(INSTALL_SHARED) $$i $(DESTDIR)$(DESTSHARED)/`basename $$i`; \ fi; \ done $(DESTSHARED): @for i in $(DESTDIRS); \ do \ if test ! -d $(DESTDIR)$$i; then \ echo "Creating directory $$i"; \ $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \ else true; \ fi; \ done # Install the interpreter with $(VERSION) affixed # This goes into $(exec_prefix) altbininstall: $(BUILDPYTHON) @for i in $(BINDIR) $(LIBDIR); \ do \ if test ! -d $(DESTDIR)$$i; then \ echo "Creating directory $$i"; \ $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \ else true; \ fi; \ done if test "$(PYTHONFRAMEWORKDIR)" = "no-framework" ; then \ $(INSTALL_PROGRAM) $(BUILDPYTHON) $(DESTDIR)$(BINDIR)/python$(LDVERSION)$(EXE); \ else \ $(INSTALL_PROGRAM) $(STRIPFLAG) Mac/pythonw $(DESTDIR)$(BINDIR)/python$(LDVERSION)$(EXE); \ fi -if test "$(VERSION)" != "$(LDVERSION)"; then \ if test -f $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE) -o -h $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE); \ then rm -f $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE); \ fi; \ (cd $(DESTDIR)$(BINDIR); $(LN) python$(LDVERSION)$(EXE) python$(VERSION)$(EXE)); \ fi if test -f $(LDLIBRARY) && test "$(PYTHONFRAMEWORKDIR)" = "no-framework" ; then \ if test -n "$(DLLLIBRARY)" ; then \ $(INSTALL_SHARED) $(DLLLIBRARY) $(DESTDIR)$(BINDIR); \ else \ $(INSTALL_SHARED) $(LDLIBRARY) $(DESTDIR)$(LIBDIR)/$(INSTSONAME); \ if test $(LDLIBRARY) != $(INSTSONAME); then \ (cd $(DESTDIR)$(LIBDIR); $(LN) -sf $(INSTSONAME) $(LDLIBRARY)) \ fi \ fi; \ if test -n "$(PY3LIBRARY)"; then \ $(INSTALL_SHARED) $(PY3LIBRARY) $(DESTDIR)$(LIBDIR)/$(PY3LIBRARY); \ fi; \ else true; \ fi if test "x$(LIPO_32BIT_FLAGS)" != "x" ; then \ rm -f $(DESTDIR)$(BINDIR)python$(VERSION)-32$(EXE); \ lipo $(LIPO_32BIT_FLAGS) \ -output $(DESTDIR)$(BINDIR)/python$(VERSION)-32$(EXE) \ $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE); \ fi bininstall: altbininstall if test ! -d $(DESTDIR)$(LIBPC); then \ echo "Creating directory $(LIBPC)"; \ $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$(LIBPC); \ fi -if test -f $(DESTDIR)$(BINDIR)/python3$(EXE) -o -h $(DESTDIR)$(BINDIR)/python3$(EXE); \ then rm -f $(DESTDIR)$(BINDIR)/python3$(EXE); \ else true; \ fi (cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)$(EXE) python3$(EXE)) -if test "$(VERSION)" != "$(LDVERSION)"; then \ rm -f $(DESTDIR)$(BINDIR)/python$(VERSION)-config; \ (cd $(DESTDIR)$(BINDIR); $(LN) -s python$(LDVERSION)-config python$(VERSION)-config); \ rm -f $(DESTDIR)$(LIBPC)/python-$(LDVERSION).pc; \ (cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION).pc python-$(LDVERSION).pc); \ fi -rm -f $(DESTDIR)$(BINDIR)/python3-config (cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)-config python3-config) -rm -f $(DESTDIR)$(LIBPC)/python3.pc (cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION).pc python3.pc) -rm -f $(DESTDIR)$(BINDIR)/idle3 (cd $(DESTDIR)$(BINDIR); $(LN) -s idle$(VERSION) idle3) -rm -f $(DESTDIR)$(BINDIR)/pydoc3 (cd $(DESTDIR)$(BINDIR); $(LN) -s pydoc$(VERSION) pydoc3) -rm -f $(DESTDIR)$(BINDIR)/2to3 (cd $(DESTDIR)$(BINDIR); $(LN) -s 2to3-$(VERSION) 2to3) -rm -f $(DESTDIR)$(BINDIR)/pyvenv (cd $(DESTDIR)$(BINDIR); $(LN) -s pyvenv-$(VERSION) pyvenv) if test "x$(LIPO_32BIT_FLAGS)" != "x" ; then \ rm -f $(DESTDIR)$(BINDIR)/python3-32$(EXE); \ (cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)-32$(EXE) python3-32$(EXE)) \ fi # Install the versioned manual page altmaninstall: @for i in $(MANDIR) $(MANDIR)/man1; \ do \ if test ! -d $(DESTDIR)$$i; then \ echo "Creating directory $$i"; \ $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \ else true; \ fi; \ done $(INSTALL_DATA) $(srcdir)/Misc/python.man \ $(DESTDIR)$(MANDIR)/man1/python$(VERSION).1 # Install the unversioned manual page maninstall: altmaninstall -rm -f $(DESTDIR)$(MANDIR)/man1/python3.1 (cd $(DESTDIR)$(MANDIR)/man1; $(LN) -s python$(VERSION).1 python3.1) # Install the library XMLLIBSUBDIRS= xml xml/dom xml/etree xml/parsers xml/sax LIBSUBDIRS= tkinter tkinter/test tkinter/test/test_tkinter \ tkinter/test/test_ttk site-packages test \ test/audiodata \ test/capath test/data \ test/cjkencodings test/decimaltestdata test/xmltestdata \ test/dtracedata \ test/eintrdata \ test/imghdrdata \ test/libregrtest \ test/subprocessdata test/sndhdrdata test/support \ test/tracedmodules test/encoded_modules \ test/test_import \ test/test_import/data \ test/test_import/data/circular_imports \ test/test_import/data/circular_imports/subpkg \ test/test_import/data/package \ test/test_import/data/package2 \ test/test_importlib/namespace_pkgs \ test/test_importlib/namespace_pkgs/both_portions \ test/test_importlib/namespace_pkgs/both_portions/foo \ test/test_importlib/namespace_pkgs/not_a_namespace_pkg \ test/test_importlib/namespace_pkgs/not_a_namespace_pkg/foo \ test/test_importlib/namespace_pkgs/portion1 \ test/test_importlib/namespace_pkgs/portion1/foo \ test/test_importlib/namespace_pkgs/portion2 \ test/test_importlib/namespace_pkgs/portion2/foo \ test/test_importlib/namespace_pkgs/project1 \ test/test_importlib/namespace_pkgs/project1/parent \ test/test_importlib/namespace_pkgs/project1/parent/child \ test/test_importlib/namespace_pkgs/project2 \ test/test_importlib/namespace_pkgs/project2/parent \ test/test_importlib/namespace_pkgs/project2/parent/child \ test/test_importlib/namespace_pkgs/project3 \ test/test_importlib/namespace_pkgs/project3/parent \ test/test_importlib/namespace_pkgs/project3/parent/child \ test/test_importlib/namespace_pkgs/module_and_namespace_package \ test/test_importlib/namespace_pkgs/module_and_namespace_package/a_test \ asyncio \ test/test_asyncio \ collections concurrent concurrent/futures encodings \ email email/mime test/test_email test/test_email/data \ ensurepip ensurepip/_bundled \ html json test/test_json http dbm xmlrpc \ sqlite3 sqlite3/test \ logging csv wsgiref urllib \ lib2to3 lib2to3/fixes lib2to3/pgen2 lib2to3/tests \ lib2to3/tests/data lib2to3/tests/data/fixers \ lib2to3/tests/data/fixers/myfixes \ ctypes ctypes/test ctypes/macholib \ idlelib idlelib/Icons idlelib/idle_test \ distutils distutils/command distutils/tests $(XMLLIBSUBDIRS) \ importlib test/test_importlib test/test_importlib/builtin \ test/test_importlib/extension test/test_importlib/frozen \ test/test_importlib/import_ test/test_importlib/source \ test/test_tools test/test_warnings test/test_warnings/data \ turtledemo \ multiprocessing multiprocessing/dummy \ unittest unittest/test unittest/test/testmock \ venv venv/scripts venv/scripts/common venv/scripts/posix \ curses pydoc_data libinstall: build_all $(srcdir)/Modules/xxmodule.c @for i in $(SCRIPTDIR) $(LIBDEST); \ do \ if test ! -d $(DESTDIR)$$i; then \ echo "Creating directory $$i"; \ $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \ else true; \ fi; \ done @for d in $(LIBSUBDIRS); \ do \ a=$(srcdir)/Lib/$$d; \ if test ! -d $$a; then continue; else true; fi; \ b=$(LIBDEST)/$$d; \ if test ! -d $(DESTDIR)$$b; then \ echo "Creating directory $$b"; \ $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$b; \ else true; \ fi; \ done @for i in $(srcdir)/Lib/*.py; \ do \ if test -x $$i; then \ $(INSTALL_SCRIPT) $$i $(DESTDIR)$(LIBDEST); \ echo $(INSTALL_SCRIPT) $$i $(LIBDEST); \ else \ $(INSTALL_DATA) $$i $(DESTDIR)$(LIBDEST); \ echo $(INSTALL_DATA) $$i $(LIBDEST); \ fi; \ done @for d in $(LIBSUBDIRS); \ do \ a=$(srcdir)/Lib/$$d; \ if test ! -d $$a; then continue; else true; fi; \ if test `ls $$a | wc -l` -lt 1; then continue; fi; \ b=$(LIBDEST)/$$d; \ for i in $$a/*; \ do \ case $$i in \ *CVS) ;; \ *.py[co]) ;; \ *.orig) ;; \ *~) ;; \ *) \ if test -d $$i; then continue; fi; \ if test -x $$i; then \ echo $(INSTALL_SCRIPT) $$i $$b; \ $(INSTALL_SCRIPT) $$i $(DESTDIR)$$b; \ else \ echo $(INSTALL_DATA) $$i $$b; \ $(INSTALL_DATA) $$i $(DESTDIR)$$b; \ fi;; \ esac; \ done; \ done $(INSTALL_DATA) `cat pybuilddir.txt`/_sysconfigdata_$(ABIFLAGS)_$(MACHDEP)_$(MULTIARCH).py \ $(DESTDIR)$(LIBDEST); \ $(INSTALL_DATA) $(srcdir)/LICENSE $(DESTDIR)$(LIBDEST)/LICENSE.txt if test -d $(DESTDIR)$(LIBDEST)/distutils/tests; then \ $(INSTALL_DATA) $(srcdir)/Modules/xxmodule.c \ $(DESTDIR)$(LIBDEST)/distutils/tests ; \ fi -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ $(PYTHON_FOR_BUILD) -Wi $(DESTDIR)$(LIBDEST)/compileall.py \ -d $(LIBDEST) -f \ -x 'bad_coding|badsyntax|site-packages|lib2to3/tests/data' \ $(DESTDIR)$(LIBDEST) -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ $(PYTHON_FOR_BUILD) -Wi -O $(DESTDIR)$(LIBDEST)/compileall.py \ -d $(LIBDEST) -f \ -x 'bad_coding|badsyntax|site-packages|lib2to3/tests/data' \ $(DESTDIR)$(LIBDEST) -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ $(PYTHON_FOR_BUILD) -Wi -OO $(DESTDIR)$(LIBDEST)/compileall.py \ -d $(LIBDEST) -f \ -x 'bad_coding|badsyntax|site-packages|lib2to3/tests/data' \ $(DESTDIR)$(LIBDEST) -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ $(PYTHON_FOR_BUILD) -Wi $(DESTDIR)$(LIBDEST)/compileall.py \ -d $(LIBDEST)/site-packages -f \ -x badsyntax $(DESTDIR)$(LIBDEST)/site-packages -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ $(PYTHON_FOR_BUILD) -Wi -O $(DESTDIR)$(LIBDEST)/compileall.py \ -d $(LIBDEST)/site-packages -f \ -x badsyntax $(DESTDIR)$(LIBDEST)/site-packages -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ $(PYTHON_FOR_BUILD) -Wi -OO $(DESTDIR)$(LIBDEST)/compileall.py \ -d $(LIBDEST)/site-packages -f \ -x badsyntax $(DESTDIR)$(LIBDEST)/site-packages -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ $(PYTHON_FOR_BUILD) -m lib2to3.pgen2.driver $(DESTDIR)$(LIBDEST)/lib2to3/Grammar.txt -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ $(PYTHON_FOR_BUILD) -m lib2to3.pgen2.driver $(DESTDIR)$(LIBDEST)/lib2to3/PatternGrammar.txt python-config: $(srcdir)/Misc/python-config.in Misc/python-config.sh # Substitution happens here, as the completely-expanded BINDIR # is not available in configure sed -e "s,@EXENAME@,$(BINDIR)/python$(LDVERSION)$(EXE)," < $(srcdir)/Misc/python-config.in >python-config.py # Replace makefile compat. variable references with shell script compat. ones; $(VAR) -> ${VAR} LC_ALL=C sed -e 's,\$$(\([A-Za-z0-9_]*\)),\$$\{\1\},g' < Misc/python-config.sh >python-config # On Darwin, always use the python version of the script, the shell # version doesn't use the compiler customizations that are provided # in python (_osx_support.py). if test `uname -s` = Darwin; then \ cp python-config.py python-config; \ fi # Install the include files INCLDIRSTOMAKE=$(INCLUDEDIR) $(CONFINCLUDEDIR) $(INCLUDEPY) $(CONFINCLUDEPY) inclinstall: @for i in $(INCLDIRSTOMAKE); \ do \ if test ! -d $(DESTDIR)$$i; then \ echo "Creating directory $$i"; \ $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \ else true; \ fi; \ done @for i in $(srcdir)/Include/*.h; \ do \ echo $(INSTALL_DATA) $$i $(INCLUDEPY); \ $(INSTALL_DATA) $$i $(DESTDIR)$(INCLUDEPY); \ done $(INSTALL_DATA) pyconfig.h $(DESTDIR)$(CONFINCLUDEPY)/pyconfig.h # Install the library and miscellaneous stuff needed for extending/embedding # This goes into $(exec_prefix) LIBPL= $(prefix)/lib64/python3.6/config-$(VERSION)$(ABIFLAGS)-x86_64-linux-gnu # pkgconfig directory LIBPC= $(LIBDIR)/pkgconfig libainstall: build_all python-config @for i in $(LIBDIR) $(LIBPL) $(LIBPC); \ do \ if test ! -d $(DESTDIR)$$i; then \ echo "Creating directory $$i"; \ $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \ else true; \ fi; \ done $(INSTALL_DATA) Modules/config.c $(DESTDIR)$(LIBPL)/config.c $(INSTALL_DATA) Programs/python.o $(DESTDIR)$(LIBPL)/python.o $(INSTALL_DATA) $(srcdir)/Modules/config.c.in $(DESTDIR)$(LIBPL)/config.c.in $(INSTALL_DATA) Makefile $(DESTDIR)$(LIBPL)/Makefile $(INSTALL_DATA) Modules/Setup $(DESTDIR)$(LIBPL)/Setup $(INSTALL_DATA) Modules/Setup.local $(DESTDIR)$(LIBPL)/Setup.local $(INSTALL_DATA) Modules/Setup.config $(DESTDIR)$(LIBPL)/Setup.config $(INSTALL_DATA) Misc/python.pc $(DESTDIR)$(LIBPC)/python-$(VERSION).pc $(INSTALL_SCRIPT) $(srcdir)/Modules/makesetup $(DESTDIR)$(LIBPL)/makesetup $(INSTALL_SCRIPT) $(srcdir)/install-sh $(DESTDIR)$(LIBPL)/install-sh $(INSTALL_SCRIPT) python-config.py $(DESTDIR)$(LIBPL)/python-config.py $(INSTALL_SCRIPT) python-config $(DESTDIR)$(BINDIR)/python$(LDVERSION)-config @if [ -s Modules/python.exp -a \ "`echo $(MACHDEP) | sed 's/^\(...\).*/\1/'`" = "aix" ]; then \ echo; echo "Installing support files for building shared extension modules on AIX:"; \ $(INSTALL_DATA) Modules/python.exp \ $(DESTDIR)$(LIBPL)/python.exp; \ echo; echo "$(LIBPL)/python.exp"; \ $(INSTALL_SCRIPT) $(srcdir)/Modules/makexp_aix \ $(DESTDIR)$(LIBPL)/makexp_aix; \ echo "$(LIBPL)/makexp_aix"; \ $(INSTALL_SCRIPT) Modules/ld_so_aix \ $(DESTDIR)$(LIBPL)/ld_so_aix; \ echo "$(LIBPL)/ld_so_aix"; \ echo; echo "See Misc/AIX-NOTES for details."; \ else true; \ fi # Install the dynamically loadable modules # This goes into $(exec_prefix) sharedinstall: sharedmods $(RUNSHARED) $(PYTHON_FOR_BUILD) $(srcdir)/setup.py install \ --prefix=$(prefix) \ --install-scripts=$(BINDIR) \ --install-platlib=$(DESTSHARED) \ --root=$(DESTDIR)/ -rm $(DESTDIR)$(DESTSHARED)/_sysconfigdata_$(ABIFLAGS)_$(MACHDEP)_$(MULTIARCH).py -rm -r $(DESTDIR)$(DESTSHARED)/__pycache__ # Here are a couple of targets for MacOSX again, to install a full # framework-based Python. frameworkinstall installs everything, the # subtargets install specific parts. Much of the actual work is offloaded to # the Makefile in Mac # # # This target is here for backward compatibility, previous versions of Python # hadn't integrated framework installation in the normal install process. frameworkinstall: install # On install, we re-make the framework # structure in the install location, /Library/Frameworks/ or the argument to # --enable-framework. If --enable-framework has been specified then we have # automatically set prefix to the location deep down in the framework, so we # only have to cater for the structural bits of the framework. frameworkinstallframework: frameworkinstallstructure install frameworkinstallmaclib frameworkinstallstructure: $(LDLIBRARY) @if test "$(PYTHONFRAMEWORKDIR)" = no-framework; then \ echo Not configured with --enable-framework; \ exit 1; \ else true; \ fi @for i in $(prefix)/Resources/English.lproj $(prefix)/lib; do\ if test ! -d $(DESTDIR)$$i; then \ echo "Creating directory $(DESTDIR)$$i"; \ $(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \ else true; \ fi; \ done $(LN) -fsn include/python$(LDVERSION) $(DESTDIR)$(prefix)/Headers sed 's/%VERSION%/'"`$(RUNSHARED) ./$(BUILDPYTHON) -c 'import platform; print(platform.python_version())'`"'/g' < $(RESSRCDIR)/Info.plist > $(DESTDIR)$(prefix)/Resources/Info.plist $(LN) -fsn $(VERSION) $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Versions/Current $(LN) -fsn Versions/Current/$(PYTHONFRAMEWORK) $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/$(PYTHONFRAMEWORK) $(LN) -fsn Versions/Current/Headers $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Headers $(LN) -fsn Versions/Current/Resources $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Resources $(INSTALL_SHARED) $(LDLIBRARY) $(DESTDIR)$(PYTHONFRAMEWORKPREFIX)/$(LDLIBRARY) # This installs Mac/Lib into the framework # Install a number of symlinks to keep software that expects a normal unix # install (which includes python-config) happy. frameworkinstallmaclib: $(LN) -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(LIBPL)/libpython$(LDVERSION).a" $(LN) -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(LIBPL)/libpython$(LDVERSION).dylib" $(LN) -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(LIBPL)/libpython$(VERSION).a" $(LN) -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(LIBPL)/libpython$(VERSION).dylib" $(LN) -fs "../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/libpython$(LDVERSION).dylib" $(LN) -fs "../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/libpython$(VERSION).dylib" # This installs the IDE, the Launcher and other apps into /Applications frameworkinstallapps: cd Mac && $(MAKE) installapps DESTDIR="$(DESTDIR)" # Build the bootstrap executable that will spawn the interpreter inside # an app bundle within the framework. This allows the interpreter to # run OS X GUI APIs. frameworkpythonw: cd Mac && $(MAKE) pythonw # This installs the python* and other bin symlinks in $prefix/bin or in # a bin directory relative to the framework root frameworkinstallunixtools: cd Mac && $(MAKE) installunixtools DESTDIR="$(DESTDIR)" frameworkaltinstallunixtools: cd Mac && $(MAKE) altinstallunixtools DESTDIR="$(DESTDIR)" # This installs the Tools into the applications directory. # It is not part of a normal frameworkinstall frameworkinstallextras: cd Mac && $(MAKE) installextras DESTDIR="$(DESTDIR)" # This installs a few of the useful scripts in Tools/scripts scriptsinstall: SRCDIR=$(srcdir) $(RUNSHARED) \ $(PYTHON_FOR_BUILD) $(srcdir)/Tools/scripts/setup.py install \ --prefix=$(prefix) \ --install-scripts=$(BINDIR) \ --root=$(DESTDIR)/ # Build the toplevel Makefile Makefile.pre: $(srcdir)/Makefile.pre.in config.status CONFIG_FILES=Makefile.pre CONFIG_HEADERS= $(SHELL) config.status $(MAKE) -f Makefile.pre Makefile # Run the configure script. config.status: $(srcdir)/configure $(SHELL) $(srcdir)/configure $(CONFIG_ARGS) .PRECIOUS: config.status $(BUILDPYTHON) Makefile Makefile.pre # Some make's put the object file in the current directory .c.o: $(CC) -c $(PY_CORE_CFLAGS) -o $@ $< # bpo-30104: dtoa.c uses union to cast double to unsigned long[2]. clang 4.0 # with -O2 or higher and strict aliasing miscompiles the ratio() function # causing rounding issues. Compile dtoa.c using -fno-strict-aliasing on clang. # https://bugs.llvm.org//show_bug.cgi?id=31928 Python/dtoa.o: Python/dtoa.c $(CC) -c $(PY_CORE_CFLAGS) $(CFLAGS_ALIASING) -o $@ $< # Run reindent on the library reindent: ./$(BUILDPYTHON) $(srcdir)/Tools/scripts/reindent.py -r $(srcdir)/Lib # Rerun configure with the same options as it was run last time, # provided the config.status script exists recheck: $(SHELL) config.status --recheck $(SHELL) config.status # Regenerate configure and pyconfig.h.in .PHONY: autoconf autoconf: # Regenerate the configure script from configure.ac using autoconf (cd $(srcdir); autoconf -Wall) # Regenerate pyconfig.h.in from configure.ac using autoheader (cd $(srcdir); autoheader -Wall) # Create a tags file for vi tags:: ctags -w $(srcdir)/Include/*.h for i in $(SRCDIRS); do ctags -f tags -w -a $(srcdir)/$$i/*.[ch]; done ctags -f tags -w -a $(srcdir)/Modules/_ctypes/*.[ch] LC_ALL=C sort -o tags tags # Create a tags file for GNU Emacs TAGS:: cd $(srcdir); \ etags Include/*.h; \ for i in $(SRCDIRS); do etags -a $$i/*.[ch]; done # Sanitation targets -- clean leaves libraries, executables and tags # files, which clobber removes as well pycremoval: -find $(srcdir) -depth -name '__pycache__' -exec rm -rf {} ';' -find $(srcdir) -name '*.py[co]' -exec rm -f {} ';' rmtestturds: -rm -f *BAD *GOOD *SKIPPED -rm -rf OUT -rm -f *.TXT -rm -f *.txt -rm -f gb-18030-2000.xml docclean: -rm -rf Doc/build -rm -rf Doc/tools/sphinx Doc/tools/pygments Doc/tools/docutils clean: pycremoval find . -name '*.[oa]' -exec rm -f {} ';' find . -name '*.s[ol]' -exec rm -f {} ';' find . -name '*.so.[0-9]*.[0-9]*' -exec rm -f {} ';' find build -name 'fficonfig.h' -exec rm -f {} ';' || true find build -name '*.py' -exec rm -f {} ';' || true find build -name '*.py[co]' -exec rm -f {} ';' || true -rm -f pybuilddir.txt -rm -f Lib/lib2to3/*Grammar*.pickle -rm -f Programs/_testembed Programs/_freeze_importlib -find build -type f -a ! -name '*.gc??' -exec rm -f {} ';' -rm -f Include/pydtrace_probes.h profile-removal: find . -name '*.gc??' -exec rm -f {} ';' find . -name '*.profclang?' -exec rm -f {} ';' find . -name '*.dyn' -exec rm -f {} ';' rm -f $(COVERAGE_INFO) rm -rf $(COVERAGE_REPORT) clobber: clean profile-removal -rm -f $(BUILDPYTHON) $(PGEN) $(LIBRARY) $(LDLIBRARY) $(DLLLIBRARY) \ tags TAGS \ config.cache config.log pyconfig.h Modules/config.c -rm -rf build platform -rm -rf $(PYTHONFRAMEWORKDIR) -rm -f python-config.py python-config # Make things extra clean, before making a distribution: # remove all generated files, even Makefile[.pre] # Keep configure and Python-ast.[ch], it's possible they can't be generated distclean: clobber for file in $(srcdir)/Lib/test/data/* ; do \ if test "$$file" != "$(srcdir)/Lib/test/data/README"; then rm "$$file"; fi; \ done -rm -f core Makefile Makefile.pre config.status \ Modules/Setup Modules/Setup.local Modules/Setup.config \ Modules/ld_so_aix Modules/python.exp Misc/python.pc \ Misc/python-config.sh -rm -f python*-gdb.py # Issue #28258: set LC_ALL to avoid issues with Estonian locale. # Expansion is performed here by shell (spawned by make) itself before # arguments are passed to find. So LC_ALL=C must be set as a separate # command. LC_ALL=C; find $(srcdir)/[a-zA-Z]* '(' -name '*.fdc' -o -name '*~' \ -o -name '[@,#]*' -o -name '*.old' \ -o -name '*.orig' -o -name '*.rej' \ -o -name '*.bak' ')' \ -exec rm -f {} ';' # Check for smelly exported symbols (not starting with Py/_Py) smelly: build_all nm -p $(LIBRARY) | \ sed -n "/ [TDB] /s/.* //p" | grep -v "^_*Py" | sort -u; \ # Find files with funny names funny: find $(SUBDIRS) $(SUBDIRSTOO) \ -type d \ -o -name '*.[chs]' \ -o -name '*.py' \ -o -name '*.pyw' \ -o -name '*.dat' \ -o -name '*.el' \ -o -name '*.fd' \ -o -name '*.in' \ -o -name '*.gif' \ -o -name '*.txt' \ -o -name '*.xml' \ -o -name '*.xbm' \ -o -name '*.xpm' \ -o -name '*.uue' \ -o -name '*.decTest' \ -o -name '*.tmCommand' \ -o -name '*.tmSnippet' \ -o -name 'Setup' \ -o -name 'Setup.*' \ -o -name README \ -o -name NEWS \ -o -name HISTORY \ -o -name Makefile \ -o -name ChangeLog \ -o -name .hgignore \ -o -name .bzrignore \ -o -name MANIFEST \ -o -print # Perform some verification checks on any modified files. patchcheck: build_all $(RUNSHARED) ./$(BUILDPYTHON) $(srcdir)/Tools/scripts/patchcheck.py # Dependencies Python/thread.o: $(srcdir)/Python/thread_foobar.h $(srcdir)/Python/thread_nt.h $(srcdir)/Python/thread_pthread.h $(srcdir)/Python/condvar.h # Declare targets that aren't real files .PHONY: all build_all sharedmods check-clean-src oldsharedmods test quicktest .PHONY: install altinstall oldsharedinstall bininstall altbininstall .PHONY: maninstall libinstall inclinstall libainstall sharedinstall .PHONY: frameworkinstall frameworkinstallframework frameworkinstallstructure .PHONY: frameworkinstallmaclib frameworkinstallapps frameworkinstallunixtools .PHONY: frameworkaltinstallunixtools recheck clean clobber distclean .PHONY: smelly funny patchcheck touch altmaninstall commoninstall .PHONY: gdbhooks # IF YOU PUT ANYTHING HERE IT WILL GO AWAY # Local Variables: # mode: makefile # End: # Rules appended by makedepend Modules/_threadmodule.o: $(srcdir)/Modules/_threadmodule.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/_threadmodule.c -o Modules/_threadmodule.o Modules/_thread$(EXT_SUFFIX): Modules/_threadmodule.o; $(BLDSHARED) Modules/_threadmodule.o -o Modules/_thread$(EXT_SUFFIX) Modules/posixmodule.o: $(srcdir)/Modules/posixmodule.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/posixmodule.c -o Modules/posixmodule.o Modules/posix$(EXT_SUFFIX): Modules/posixmodule.o; $(BLDSHARED) Modules/posixmodule.o -o Modules/posix$(EXT_SUFFIX) Modules/errnomodule.o: $(srcdir)/Modules/errnomodule.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/errnomodule.c -o Modules/errnomodule.o Modules/errno$(EXT_SUFFIX): Modules/errnomodule.o; $(BLDSHARED) Modules/errnomodule.o -o Modules/errno$(EXT_SUFFIX) Modules/pwdmodule.o: $(srcdir)/Modules/pwdmodule.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/pwdmodule.c -o Modules/pwdmodule.o Modules/pwd$(EXT_SUFFIX): Modules/pwdmodule.o; $(BLDSHARED) Modules/pwdmodule.o -o Modules/pwd$(EXT_SUFFIX) Modules/_sre.o: $(srcdir)/Modules/_sre.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/_sre.c -o Modules/_sre.o Modules/_sre$(EXT_SUFFIX): Modules/_sre.o; $(BLDSHARED) Modules/_sre.o -o Modules/_sre$(EXT_SUFFIX) Modules/_codecsmodule.o: $(srcdir)/Modules/_codecsmodule.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/_codecsmodule.c -o Modules/_codecsmodule.o Modules/_codecs$(EXT_SUFFIX): Modules/_codecsmodule.o; $(BLDSHARED) Modules/_codecsmodule.o -o Modules/_codecs$(EXT_SUFFIX) Modules/_weakref.o: $(srcdir)/Modules/_weakref.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/_weakref.c -o Modules/_weakref.o Modules/_weakref$(EXT_SUFFIX): Modules/_weakref.o; $(BLDSHARED) Modules/_weakref.o -o Modules/_weakref$(EXT_SUFFIX) Modules/_functoolsmodule.o: $(srcdir)/Modules/_functoolsmodule.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/_functoolsmodule.c -o Modules/_functoolsmodule.o Modules/_functools$(EXT_SUFFIX): Modules/_functoolsmodule.o; $(BLDSHARED) Modules/_functoolsmodule.o -o Modules/_functools$(EXT_SUFFIX) Modules/_operator.o: $(srcdir)/Modules/_operator.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/_operator.c -o Modules/_operator.o Modules/_operator$(EXT_SUFFIX): Modules/_operator.o; $(BLDSHARED) Modules/_operator.o -o Modules/_operator$(EXT_SUFFIX) Modules/_collectionsmodule.o: $(srcdir)/Modules/_collectionsmodule.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/_collectionsmodule.c -o Modules/_collectionsmodule.o Modules/_collections$(EXT_SUFFIX): Modules/_collectionsmodule.o; $(BLDSHARED) Modules/_collectionsmodule.o -o Modules/_collections$(EXT_SUFFIX) Modules/itertoolsmodule.o: $(srcdir)/Modules/itertoolsmodule.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/itertoolsmodule.c -o Modules/itertoolsmodule.o Modules/itertools$(EXT_SUFFIX): Modules/itertoolsmodule.o; $(BLDSHARED) Modules/itertoolsmodule.o -o Modules/itertools$(EXT_SUFFIX) Modules/atexitmodule.o: $(srcdir)/Modules/atexitmodule.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/atexitmodule.c -o Modules/atexitmodule.o Modules/atexit$(EXT_SUFFIX): Modules/atexitmodule.o; $(BLDSHARED) Modules/atexitmodule.o -o Modules/atexit$(EXT_SUFFIX) Modules/signalmodule.o: $(srcdir)/Modules/signalmodule.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/signalmodule.c -o Modules/signalmodule.o Modules/_signal$(EXT_SUFFIX): Modules/signalmodule.o; $(BLDSHARED) Modules/signalmodule.o -o Modules/_signal$(EXT_SUFFIX) Modules/_stat.o: $(srcdir)/Modules/_stat.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/_stat.c -o Modules/_stat.o Modules/_stat$(EXT_SUFFIX): Modules/_stat.o; $(BLDSHARED) Modules/_stat.o -o Modules/_stat$(EXT_SUFFIX) Modules/timemodule.o: $(srcdir)/Modules/timemodule.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/timemodule.c -o Modules/timemodule.o Modules/time$(EXT_SUFFIX): Modules/timemodule.o; $(BLDSHARED) Modules/timemodule.o -o Modules/time$(EXT_SUFFIX) Modules/_localemodule.o: $(srcdir)/Modules/_localemodule.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/_localemodule.c -o Modules/_localemodule.o Modules/_locale$(EXT_SUFFIX): Modules/_localemodule.o; $(BLDSHARED) Modules/_localemodule.o -o Modules/_locale$(EXT_SUFFIX) Modules/_iomodule.o: $(srcdir)/Modules/_io/_iomodule.c; $(CC) $(PY_CORE_CFLAGS) -I$(srcdir)/Modules/_io -c $(srcdir)/Modules/_io/_iomodule.c -o Modules/_iomodule.o Modules/iobase.o: $(srcdir)/Modules/_io/iobase.c; $(CC) $(PY_CORE_CFLAGS) -I$(srcdir)/Modules/_io -c $(srcdir)/Modules/_io/iobase.c -o Modules/iobase.o Modules/fileio.o: $(srcdir)/Modules/_io/fileio.c; $(CC) $(PY_CORE_CFLAGS) -I$(srcdir)/Modules/_io -c $(srcdir)/Modules/_io/fileio.c -o Modules/fileio.o Modules/bytesio.o: $(srcdir)/Modules/_io/bytesio.c; $(CC) $(PY_CORE_CFLAGS) -I$(srcdir)/Modules/_io -c $(srcdir)/Modules/_io/bytesio.c -o Modules/bytesio.o Modules/bufferedio.o: $(srcdir)/Modules/_io/bufferedio.c; $(CC) $(PY_CORE_CFLAGS) -I$(srcdir)/Modules/_io -c $(srcdir)/Modules/_io/bufferedio.c -o Modules/bufferedio.o Modules/textio.o: $(srcdir)/Modules/_io/textio.c; $(CC) $(PY_CORE_CFLAGS) -I$(srcdir)/Modules/_io -c $(srcdir)/Modules/_io/textio.c -o Modules/textio.o Modules/stringio.o: $(srcdir)/Modules/_io/stringio.c; $(CC) $(PY_CORE_CFLAGS) -I$(srcdir)/Modules/_io -c $(srcdir)/Modules/_io/stringio.c -o Modules/stringio.o Modules/_io$(EXT_SUFFIX): Modules/_iomodule.o Modules/iobase.o Modules/fileio.o Modules/bytesio.o Modules/bufferedio.o Modules/textio.o Modules/stringio.o; $(BLDSHARED) Modules/_iomodule.o Modules/iobase.o Modules/fileio.o Modules/bytesio.o Modules/bufferedio.o Modules/textio.o Modules/stringio.o -o Modules/_io$(EXT_SUFFIX) Modules/zipimport.o: $(srcdir)/Modules/zipimport.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/zipimport.c -o Modules/zipimport.o Modules/zipimport$(EXT_SUFFIX): Modules/zipimport.o; $(BLDSHARED) Modules/zipimport.o -o Modules/zipimport$(EXT_SUFFIX) Modules/faulthandler.o: $(srcdir)/Modules/faulthandler.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/faulthandler.c -o Modules/faulthandler.o Modules/faulthandler$(EXT_SUFFIX): Modules/faulthandler.o; $(BLDSHARED) Modules/faulthandler.o -o Modules/faulthandler$(EXT_SUFFIX) Modules/_tracemalloc.o: $(srcdir)/Modules/_tracemalloc.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/_tracemalloc.c -o Modules/_tracemalloc.o Modules/hashtable.o: $(srcdir)/Modules/hashtable.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/hashtable.c -o Modules/hashtable.o Modules/_tracemalloc$(EXT_SUFFIX): Modules/_tracemalloc.o Modules/hashtable.o; $(BLDSHARED) Modules/_tracemalloc.o Modules/hashtable.o -o Modules/_tracemalloc$(EXT_SUFFIX) Modules/symtablemodule.o: $(srcdir)/Modules/symtablemodule.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/symtablemodule.c -o Modules/symtablemodule.o Modules/_symtable$(EXT_SUFFIX): Modules/symtablemodule.o; $(BLDSHARED) Modules/symtablemodule.o -o Modules/_symtable$(EXT_SUFFIX) Modules/xxsubtype.o: $(srcdir)/Modules/xxsubtype.c; $(CC) $(PY_CORE_CFLAGS) -c $(srcdir)/Modules/xxsubtype.c -o Modules/xxsubtype.o Modules/xxsubtype$(EXT_SUFFIX): Modules/xxsubtype.o; $(BLDSHARED) Modules/xxsubtype.o -o Modules/xxsubtype$(EXT_SUFFIX)
Upload File
Create Folder