File Manager

X7ROOT File Manager

Current Path: /usr/include/linux

ðŸ“ ..
ðŸ“„ a.out.h(6.73 KB)
ðŸ“„ acct.h(3.65 KB)
ðŸ“„ adb.h(1.11 KB)
ðŸ“„ adfs_fs.h(936 B)
ðŸ“„ affs_hardblocks.h(1.51 KB)
ðŸ“„ agpgart.h(3.85 KB)
ðŸ“„ aio_abi.h(3.34 KB)
ðŸ“„ am437x-vpfe.h(3.59 KB)
ðŸ“ android
ðŸ“„ apm_bios.h(3.6 KB)
ðŸ“„ arcfb.h(213 B)
ðŸ“„ arm_sdei.h(2.69 KB)
ðŸ“„ aspeed-lpc-ctrl.h(1.74 KB)
ðŸ“„ atalk.h(1023 B)
ðŸ“„ atm.h(7.7 KB)
ðŸ“„ atm_eni.h(648 B)
ðŸ“„ atm_he.h(406 B)
ðŸ“„ atm_idt77105.h(955 B)
ðŸ“„ atm_nicstar.h(1.25 KB)
ðŸ“„ atm_tcp.h(1.58 KB)
ðŸ“„ atm_zatm.h(1.5 KB)
ðŸ“„ atmapi.h(952 B)
ðŸ“„ atmarp.h(1.27 KB)
ðŸ“„ atmbr2684.h(3.19 KB)
ðŸ“„ atmclip.h(576 B)
ðŸ“„ atmdev.h(7.5 KB)
ðŸ“„ atmioc.h(1.61 KB)
ðŸ“„ atmlec.h(2.33 KB)
ðŸ“„ atmmpc.h(4.13 KB)
ðŸ“„ atmppp.h(639 B)
ðŸ“„ atmsap.h(4.85 KB)
ðŸ“„ atmsvc.h(1.81 KB)
ðŸ“„ audit.h(19.92 KB)
ðŸ“„ auto_dev-ioctl.h(4.87 KB)
ðŸ“„ auto_fs.h(6.28 KB)
ðŸ“„ auto_fs4.h(451 B)
ðŸ“„ auxvec.h(1.56 KB)
ðŸ“„ ax25.h(2.76 KB)
ðŸ“„ b1lli.h(1.68 KB)
ðŸ“„ batadv_packet.h(20.01 KB)
ðŸ“„ batman_adv.h(11.7 KB)
ðŸ“„ baycom.h(883 B)
ðŸ“„ bcache.h(8.17 KB)
ðŸ“„ bcm933xx_hcs.h(419 B)
ðŸ“„ bfs_fs.h(1.85 KB)
ðŸ“„ binfmts.h(628 B)
ðŸ“„ blkpg.h(904 B)
ðŸ“„ blktrace_api.h(4.59 KB)
ðŸ“„ blkzoned.h(6.45 KB)
ðŸ“„ bpf.h(223.3 KB)
ðŸ“„ bpf_common.h(1.33 KB)
ðŸ“„ bpf_perf_event.h(529 B)
ðŸ“„ bpfilter.h(465 B)
ðŸ“„ bpqether.h(981 B)
ðŸ“„ bsg.h(2.44 KB)
ðŸ“„ bt-bmc.h(572 B)
ðŸ“„ btf.h(4.68 KB)
ðŸ“„ btrfs.h(28.24 KB)
ðŸ“„ btrfs_tree.h(24.69 KB)
ðŸ“ byteorder
ðŸ“ caif
ðŸ“ can
ðŸ“„ can.h(7.7 KB)
ðŸ“„ capability.h(13.2 KB)
ðŸ“„ capi.h(3.05 KB)
ðŸ“„ cciss_defs.h(3.2 KB)
ðŸ“„ cciss_ioctl.h(2.7 KB)
ðŸ“„ cdrom.h(28.18 KB)
ðŸ“„ cec-funcs.h(52.64 KB)
ðŸ“„ cec.h(36.81 KB)
ðŸ“„ cfm_bridge.h(1.42 KB)
ðŸ“„ cgroupstats.h(2.17 KB)
ðŸ“„ chio.h(5.22 KB)
ðŸ“ cifs
ðŸ“„ close_range.h(377 B)
ðŸ“„ cm4000_cs.h(1.76 KB)
ðŸ“„ cn_proc.h(3.38 KB)
ðŸ“„ coda.h(17.09 KB)
ðŸ“„ coda_psdev.h(783 B)
ðŸ“„ coff.h(12.18 KB)
ðŸ“„ connector.h(2.2 KB)
ðŸ“„ const.h(788 B)
ðŸ“„ coresight-stm.h(674 B)
ðŸ“„ cramfs_fs.h(3.47 KB)
ðŸ“„ cryptouser.h(3.31 KB)
ðŸ“„ cuda.h(905 B)
ðŸ“„ cyclades.h(16.71 KB)
ðŸ“„ cycx_cfm.h(2.92 KB)
ðŸ“„ dcbnl.h(24.65 KB)
ðŸ“„ dccp.h(6.29 KB)
ðŸ“„ devlink.h(21.05 KB)
ðŸ“„ dlm.h(2.49 KB)
ðŸ“„ dlm_device.h(2.48 KB)
ðŸ“„ dlm_netlink.h(1.13 KB)
ðŸ“„ dlm_plock.h(894 B)
ðŸ“„ dlmconstants.h(4.96 KB)
ðŸ“„ dm-ioctl.h(11.13 KB)
ðŸ“„ dm-log-userspace.h(14.83 KB)
ðŸ“„ dma-buf.h(5.12 KB)
ðŸ“„ dn.h(4.53 KB)
ðŸ“„ dqblk_xfs.h(9.03 KB)
ðŸ“ dvb
ðŸ“„ edd.h(5.47 KB)
ðŸ“„ efs_fs_sb.h(2.17 KB)
ðŸ“„ elf-em.h(2.14 KB)
ðŸ“„ elf-fdpic.h(1.1 KB)
ðŸ“„ elf.h(13.16 KB)
ðŸ“„ elfcore.h(2.92 KB)
ðŸ“„ errno.h(23 B)
ðŸ“„ errqueue.h(1.44 KB)
ðŸ“„ erspan.h(1.03 KB)
ðŸ“„ ethtool.h(81.89 KB)
ðŸ“„ ethtool_netlink.h(22.29 KB)
ðŸ“„ eventpoll.h(2.67 KB)
ðŸ“„ fadvise.h(842 B)
ðŸ“„ falloc.h(3.5 KB)
ðŸ“„ fanotify.h(5.22 KB)
ðŸ“„ fb.h(16.09 KB)
ðŸ“„ fcntl.h(4.08 KB)
ðŸ“„ fd.h(11.4 KB)
ðŸ“„ fdreg.h(5.29 KB)
ðŸ“„ fib_rules.h(1.99 KB)
ðŸ“„ fiemap.h(2.71 KB)
ðŸ“„ filter.h(2.16 KB)
ðŸ“„ firewire-cdev.h(42.86 KB)
ðŸ“„ firewire-constants.h(3.16 KB)
ðŸ“„ flat.h(2.1 KB)
ðŸ“„ fou.h(694 B)
ðŸ“„ fpga-dfl.h(8.52 KB)
ðŸ“„ fs.h(13.11 KB)
ðŸ“„ fsl_hypervisor.h(7.13 KB)
ðŸ“„ fsmap.h(4.29 KB)
ðŸ“„ fuse.h(22.92 KB)
ðŸ“„ futex.h(4.88 KB)
ðŸ“„ gameport.h(897 B)
ðŸ“„ gen_stats.h(1.49 KB)
ðŸ“„ genetlink.h(2.12 KB)
ðŸ“ genwqe
ðŸ“„ gfs2_ondisk.h(14.4 KB)
ðŸ“„ gigaset_dev.h(1.41 KB)
ðŸ“„ gpio.h(6.59 KB)
ðŸ“„ gsmmux.h(1.02 KB)
ðŸ“„ gtp.h(681 B)
ðŸ“„ hash_info.h(921 B)
ðŸ“ hdlc
ðŸ“„ hdlc.h(637 B)
ðŸ“„ hdlcdrv.h(2.84 KB)
ðŸ“„ hdreg.h(22.17 KB)
ðŸ“„ hid.h(1.86 KB)
ðŸ“„ hiddev.h(6.2 KB)
ðŸ“„ hidraw.h(1.95 KB)
ðŸ“„ hpet.h(743 B)
ðŸ“ hsi
ðŸ“„ hsr_netlink.h(1.06 KB)
ðŸ“„ hw_breakpoint.h(742 B)
ðŸ“„ hyperv.h(10.89 KB)
ðŸ“„ hysdn_if.h(1.35 KB)
ðŸ“„ i2c-dev.h(2.55 KB)
ðŸ“„ i2c.h(6.96 KB)
ðŸ“„ i2o-dev.h(11.28 KB)
ðŸ“„ i8k.h(1.49 KB)
ðŸ“„ icmp.h(2.91 KB)
ðŸ“„ icmpv6.h(3.94 KB)
ðŸ“„ idxd.h(8.22 KB)
ðŸ“„ if.h(10.65 KB)
ðŸ“„ if_addr.h(1.84 KB)
ðŸ“„ if_addrlabel.h(721 B)
ðŸ“„ if_alg.h(946 B)
ðŸ“„ if_arcnet.h(3.63 KB)
ðŸ“„ if_arp.h(6.42 KB)
ðŸ“„ if_bonding.h(5.17 KB)
ðŸ“„ if_bridge.h(19.06 KB)
ðŸ“„ if_cablemodem.h(986 B)
ðŸ“„ if_eql.h(1.32 KB)
ðŸ“„ if_ether.h(8.05 KB)
ðŸ“„ if_fc.h(1.7 KB)
ðŸ“„ if_fddi.h(3.66 KB)
ðŸ“„ if_frad.h(2.95 KB)
ðŸ“„ if_hippi.h(4.14 KB)
ðŸ“„ if_infiniband.h(1.22 KB)
ðŸ“„ if_link.h(30.28 KB)
ðŸ“„ if_ltalk.h(210 B)
ðŸ“„ if_macsec.h(5.7 KB)
ðŸ“„ if_packet.h(7.73 KB)
ðŸ“„ if_phonet.h(424 B)
ðŸ“„ if_plip.h(660 B)
ðŸ“„ if_ppp.h(29 B)
ðŸ“„ if_pppol2tp.h(3.21 KB)
ðŸ“„ if_pppox.h(4.76 KB)
ðŸ“„ if_slip.h(872 B)
ðŸ“„ if_team.h(2.54 KB)
ðŸ“„ if_tun.h(4 KB)
ðŸ“„ if_tunnel.h(4.41 KB)
ðŸ“„ if_vlan.h(1.79 KB)
ðŸ“„ if_x25.h(881 B)
ðŸ“„ if_xdp.h(2.94 KB)
ðŸ“„ ife.h(351 B)
ðŸ“„ igmp.h(2.99 KB)
ðŸ“ iio
ðŸ“„ ila.h(1.22 KB)
ðŸ“„ in.h(9.78 KB)
ðŸ“„ in6.h(7.26 KB)
ðŸ“„ in_route.h(936 B)
ðŸ“„ inet_diag.h(4.56 KB)
ðŸ“„ inotify.h(3.21 KB)
ðŸ“„ input-event-codes.h(27.94 KB)
ðŸ“„ input.h(15.61 KB)
ðŸ“„ io_uring.h(6.06 KB)
ðŸ“„ ioctl.h(163 B)
ðŸ“„ iommu.h(4.79 KB)
ðŸ“„ ip.h(4.62 KB)
ðŸ“„ ip6_tunnel.h(1.91 KB)
ðŸ“„ ip_vs.h(13.31 KB)
ðŸ“„ ipc.h(2.05 KB)
ðŸ“„ ipmi.h(15.08 KB)
ðŸ“„ ipmi_bmc.h(464 B)
ðŸ“„ ipmi_msgdefs.h(3.35 KB)
ðŸ“„ ipmi_ssif_bmc.h(441 B)
ðŸ“„ ipsec.h(947 B)
ðŸ“„ ipv6.h(3.87 KB)
ðŸ“„ ipv6_route.h(1.86 KB)
ðŸ“„ ipx.h(2.29 KB)
ðŸ“„ irqnr.h(104 B)
ðŸ“ isdn
ðŸ“„ isdn.h(5.64 KB)
ðŸ“„ isdn_divertif.h(1.17 KB)
ðŸ“„ isdn_ppp.h(1.88 KB)
ðŸ“„ isdnif.h(2.31 KB)
ðŸ“„ iso_fs.h(6.33 KB)
ðŸ“„ isst_if.h(5.26 KB)
ðŸ“„ ivtv.h(2.95 KB)
ðŸ“„ ivtvfb.h(1.18 KB)
ðŸ“„ jffs2.h(6.85 KB)
ðŸ“„ joystick.h(3.35 KB)
ðŸ“„ kcm.h(822 B)
ðŸ“„ kcmp.h(522 B)
ðŸ“„ kcov.h(1.07 KB)
ðŸ“„ kd.h(6.11 KB)
ðŸ“„ kdev_t.h(383 B)
ðŸ“„ kernel-page-flags.h(900 B)
ðŸ“„ kernel.h(438 B)
ðŸ“„ kernelcapi.h(1019 B)
ðŸ“„ kexec.h(1.79 KB)
ðŸ“„ keyboard.h(12.48 KB)
ðŸ“„ keyctl.h(3.42 KB)
ðŸ“„ kfd_ioctl.h(28.14 KB)
ðŸ“„ kfd_sysfs.h(4.25 KB)
ðŸ“„ kvm.h(60.12 KB)
ðŸ“„ kvm_para.h(1001 B)
ðŸ“„ l2tp.h(5.46 KB)
ðŸ“„ libc-compat.h(8.09 KB)
ðŸ“„ lightnvm.h(4.92 KB)
ðŸ“„ limits.h(937 B)
ðŸ“„ lirc.h(7.63 KB)
ðŸ“„ llc.h(3.09 KB)
ðŸ“„ loop.h(3.42 KB)
ðŸ“„ lp.h(4.09 KB)
ðŸ“„ lwtunnel.h(2.13 KB)
ðŸ“„ magic.h(3.45 KB)
ðŸ“„ major.h(4.6 KB)
ðŸ“„ map_to_7segment.h(7.08 KB)
ðŸ“„ matroxfb.h(1.43 KB)
ðŸ“„ max2175.h(1.01 KB)
ðŸ“„ mdio.h(16.87 KB)
ðŸ“„ media-bus-format.h(6.26 KB)
ðŸ“„ media.h(11.12 KB)
ðŸ“„ mei.h(3.39 KB)
ðŸ“„ membarrier.h(7.71 KB)
ðŸ“„ memfd.h(1.29 KB)
ðŸ“„ mempolicy.h(2.18 KB)
ðŸ“„ meye.h(2.47 KB)
ðŸ“„ mic_common.h(6.37 KB)
ðŸ“„ mic_ioctl.h(2.2 KB)
ðŸ“„ mii.h(9.27 KB)
ðŸ“„ minix_fs.h(2.07 KB)
ðŸ“„ mman.h(1.35 KB)
ðŸ“ mmc
ðŸ“„ mmtimer.h(2.07 KB)
ðŸ“„ module.h(255 B)
ðŸ“„ mount.h(4.44 KB)
ðŸ“„ mpls.h(2.25 KB)
ðŸ“„ mpls_iptunnel.h(761 B)
ðŸ“„ mptcp.h(5.48 KB)
ðŸ“„ mqueue.h(2.15 KB)
ðŸ“„ mroute.h(5.3 KB)
ðŸ“„ mroute6.h(4.47 KB)
ðŸ“„ mrp_bridge.h(1.67 KB)
ðŸ“„ msdos_fs.h(6.8 KB)
ðŸ“„ msg.h(3.29 KB)
ðŸ“„ mtio.h(7.98 KB)
ðŸ“„ n_r3964.h(2.35 KB)
ðŸ“„ nbd-netlink.h(2.35 KB)
ðŸ“„ nbd.h(2.95 KB)
ðŸ“„ ncsi.h(3.79 KB)
ðŸ“„ ndctl.h(6.71 KB)
ðŸ“„ neighbour.h(5.02 KB)
ðŸ“„ net.h(2.04 KB)
ðŸ“„ net_dropmon.h(2.85 KB)
ðŸ“„ net_namespace.h(715 B)
ðŸ“„ net_tstamp.h(5.67 KB)
ðŸ“„ netconf.h(614 B)
ðŸ“„ netdevice.h(2.2 KB)
ðŸ“ netfilter
ðŸ“„ netfilter.h(1.78 KB)
ðŸ“ netfilter_arp
ðŸ“„ netfilter_arp.h(445 B)
ðŸ“ netfilter_bridge
ðŸ“„ netfilter_bridge.h(1.14 KB)
ðŸ“„ netfilter_decnet.h(1.93 KB)
ðŸ“ netfilter_ipv4
ðŸ“„ netfilter_ipv4.h(2.12 KB)
ðŸ“ netfilter_ipv6
ðŸ“„ netfilter_ipv6.h(2.14 KB)
ðŸ“„ netlink.h(11.23 KB)
ðŸ“„ netlink_diag.h(1.49 KB)
ðŸ“„ netrom.h(807 B)
ðŸ“„ nexthop.h(1.5 KB)
ðŸ“„ nfc.h(10.95 KB)
ðŸ“„ nfs.h(4.39 KB)
ðŸ“„ nfs2.h(1.43 KB)
ðŸ“„ nfs3.h(2.4 KB)
ðŸ“„ nfs4.h(6.44 KB)
ðŸ“„ nfs4_mount.h(1.89 KB)
ðŸ“„ nfs_fs.h(1.6 KB)
ðŸ“„ nfs_idmap.h(2.19 KB)
ðŸ“„ nfs_mount.h(2.09 KB)
ðŸ“„ nfsacl.h(718 B)
ðŸ“ nfsd
ðŸ“„ nilfs2_api.h(7.41 KB)
ðŸ“„ nilfs2_ondisk.h(17.61 KB)
ðŸ“„ nitro_enclaves.h(12.84 KB)
ðŸ“„ nl80211.h(327.41 KB)
ðŸ“„ nsfs.h(639 B)
ðŸ“„ nubus.h(8 KB)
ðŸ“„ nvme_ioctl.h(2.06 KB)
ðŸ“„ nvram.h(532 B)
ðŸ“„ omap3isp.h(20.36 KB)
ðŸ“„ omapfb.h(5.78 KB)
ðŸ“„ oom.h(511 B)
ðŸ“„ openat2.h(1.26 KB)
ðŸ“„ openvswitch.h(39.24 KB)
ðŸ“„ packet_diag.h(1.63 KB)
ðŸ“„ param.h(141 B)
ðŸ“„ parport.h(3.56 KB)
ðŸ“„ patchkey.h(892 B)
ðŸ“„ pci.h(1.35 KB)
ðŸ“„ pci_regs.h(56.47 KB)
ðŸ“„ pcitest.h(711 B)
ðŸ“„ perf_event.h(39.63 KB)
ðŸ“„ personality.h(2.05 KB)
ðŸ“„ pfkeyv2.h(10.32 KB)
ðŸ“„ pfrut.h(7.8 KB)
ðŸ“„ pg.h(2.34 KB)
ðŸ“„ phantom.h(1.62 KB)
ðŸ“„ phonet.h(4.57 KB)
ðŸ“„ pkt_cls.h(18.08 KB)
ðŸ“„ pkt_sched.h(29.59 KB)
ðŸ“„ pktcdvd.h(2.62 KB)
ðŸ“„ pmu.h(5.19 KB)
ðŸ“„ poll.h(22 B)
ðŸ“„ posix_acl.h(1.22 KB)
ðŸ“„ posix_acl_xattr.h(1.09 KB)
ðŸ“„ posix_types.h(1.07 KB)
ðŸ“„ ppdev.h(3.14 KB)
ðŸ“„ ppp-comp.h(2.47 KB)
ðŸ“„ ppp-ioctl.h(5.35 KB)
ðŸ“„ ppp_defs.h(4.99 KB)
ðŸ“„ pps.h(4.62 KB)
ðŸ“„ pr.h(1.05 KB)
ðŸ“„ prctl.h(7.83 KB)
ðŸ“„ psample.h(2.22 KB)
ðŸ“„ psci.h(4.23 KB)
ðŸ“„ psp-sev.h(4.48 KB)
ðŸ“„ ptp_clock.h(7.28 KB)
ðŸ“„ ptrace.h(3.59 KB)
ðŸ“„ qemu_fw_cfg.h(2.41 KB)
ðŸ“„ qnx4_fs.h(2.27 KB)
ðŸ“„ qnxtypes.h(624 B)
ðŸ“„ qrtr.h(893 B)
ðŸ“„ quota.h(6.14 KB)
ðŸ“„ radeonfb.h(360 B)
ðŸ“ raid
ðŸ“„ random.h(1.34 KB)
ðŸ“„ raw.h(365 B)
ðŸ“„ rds.h(9.08 KB)
ðŸ“„ reboot.h(1.31 KB)
ðŸ“„ reiserfs_fs.h(775 B)
ðŸ“„ reiserfs_xattr.h(533 B)
ðŸ“„ resource.h(2.29 KB)
ðŸ“„ rfkill.h(6.45 KB)
ðŸ“„ rio_cm_cdev.h(3.17 KB)
ðŸ“„ rio_mport_cdev.h(9.11 KB)
ðŸ“„ romfs_fs.h(1.21 KB)
ðŸ“„ rose.h(2.18 KB)
ðŸ“„ route.h(2.28 KB)
ðŸ“„ rpmsg.h(544 B)
ðŸ“„ rseq.h(4.79 KB)
ðŸ“„ rtc.h(3.92 KB)
ðŸ“„ rtnetlink.h(19.73 KB)
ðŸ“„ rxrpc.h(4.96 KB)
ðŸ“„ scc.h(4.49 KB)
ðŸ“ sched
ðŸ“„ sched.h(2.73 KB)
ðŸ“„ scif_ioctl.h(6.23 KB)
ðŸ“„ screen_info.h(2.42 KB)
ðŸ“„ sctp.h(35.15 KB)
ðŸ“„ sdla.h(2.77 KB)
ðŸ“„ seccomp.h(2.2 KB)
ðŸ“„ securebits.h(2.64 KB)
ðŸ“„ sed-opal.h(3.2 KB)
ðŸ“„ seg6.h(1.14 KB)
ðŸ“„ seg6_genl.h(589 B)
ðŸ“„ seg6_hmac.h(423 B)
ðŸ“„ seg6_iptunnel.h(927 B)
ðŸ“„ seg6_local.h(2.01 KB)
ðŸ“„ selinux_netlink.h(1.17 KB)
ðŸ“„ sem.h(2.97 KB)
ðŸ“„ serial.h(3.78 KB)
ðŸ“„ serial_core.h(6.1 KB)
ðŸ“„ serial_reg.h(15.13 KB)
ðŸ“„ serio.h(1.99 KB)
ðŸ“„ sev-guest.h(2.25 KB)
ðŸ“„ shm.h(3.7 KB)
ðŸ“„ signal.h(388 B)
ðŸ“„ signalfd.h(1.2 KB)
ðŸ“„ smc.h(8.31 KB)
ðŸ“„ smc_diag.h(2.66 KB)
ðŸ“„ smiapp.h(1.03 KB)
ðŸ“„ snmp.h(13.34 KB)
ðŸ“„ sock_diag.h(1.27 KB)
ðŸ“„ socket.h(901 B)
ðŸ“„ sockios.h(5.96 KB)
ðŸ“„ sonet.h(2.24 KB)
ðŸ“„ sonypi.h(5.18 KB)
ðŸ“„ sound.h(1.21 KB)
ðŸ“„ soundcard.h(44.96 KB)
ðŸ“ spi
ðŸ“„ stat.h(6.2 KB)
ðŸ“„ stddef.h(1.5 KB)
ðŸ“„ stm.h(1.25 KB)
ðŸ“„ string.h(238 B)
ðŸ“ sunrpc
ðŸ“„ suspend_ioctls.h(1.4 KB)
ðŸ“„ swab.h(6.76 KB)
ðŸ“„ switchtec_ioctl.h(5.14 KB)
ðŸ“„ sync_file.h(2.82 KB)
ðŸ“„ synclink.h(8.77 KB)
ðŸ“„ sysctl.h(25.24 KB)
ðŸ“„ sysinfo.h(1.02 KB)
ðŸ“„ target_core_user.h(4.52 KB)
ðŸ“„ taskstats.h(7.01 KB)
ðŸ“ tc_act
ðŸ“ tc_ematch
ðŸ“„ tcp.h(9.69 KB)
ðŸ“„ tcp_metrics.h(1.51 KB)
ðŸ“„ tdx-guest.h(1.27 KB)
ðŸ“„ tee.h(12.86 KB)
ðŸ“„ termios.h(506 B)
ðŸ“„ thermal.h(3.23 KB)
ðŸ“„ time.h(1.71 KB)
ðŸ“„ time_types.h(1.15 KB)
ðŸ“„ timerfd.h(936 B)
ðŸ“„ times.h(278 B)
ðŸ“„ timex.h(6.25 KB)
ðŸ“„ tiocl.h(1.69 KB)
ðŸ“„ tipc.h(8.62 KB)
ðŸ“„ tipc_config.h(14.36 KB)
ðŸ“„ tipc_netlink.h(9.17 KB)
ðŸ“„ tipc_sockets_diag.h(468 B)
ðŸ“„ tls.h(4.19 KB)
ðŸ“„ toshiba.h(1.88 KB)
ðŸ“„ tty.h(1.55 KB)
ðŸ“„ tty_flags.h(4.42 KB)
ðŸ“„ types.h(1.44 KB)
ðŸ“„ udf_fs_i.h(697 B)
ðŸ“„ udp.h(1.62 KB)
ðŸ“„ uhid.h(4.54 KB)
ðŸ“„ uinput.h(9.04 KB)
ðŸ“„ uio.h(732 B)
ðŸ“„ uleds.h(798 B)
ðŸ“„ ultrasound.h(4.46 KB)
ðŸ“„ un.h(384 B)
ðŸ“„ unistd.h(220 B)
ðŸ“„ unix_diag.h(1.22 KB)
ðŸ“ usb
ðŸ“„ usbdevice_fs.h(8.12 KB)
ðŸ“„ usbip.h(640 B)
ðŸ“„ userfaultfd.h(7.59 KB)
ðŸ“„ userio.h(1.48 KB)
ðŸ“„ utime.h(215 B)
ðŸ“„ utsname.h(669 B)
ðŸ“„ uuid.h(1.32 KB)
ðŸ“„ uvcvideo.h(2.57 KB)
ðŸ“„ v4l2-common.h(4.08 KB)
ðŸ“„ v4l2-controls.h(50.56 KB)
ðŸ“„ v4l2-dv-timings.h(30.82 KB)
ðŸ“„ v4l2-mediabus.h(4.98 KB)
ðŸ“„ v4l2-subdev.h(5.95 KB)
ðŸ“„ vbox_err.h(7.09 KB)
ðŸ“„ vbox_vmmdev_types.h(8.16 KB)
ðŸ“„ vboxguest.h(8.52 KB)
ðŸ“„ vdpa.h(1.39 KB)
ðŸ“„ version.h(430 B)
ðŸ“„ veth.h(224 B)
ðŸ“„ vfio.h(51 KB)
ðŸ“„ vfio_ccw.h(1.29 KB)
ðŸ“„ vfio_zdev.h(2.48 KB)
ðŸ“„ vhost.h(6.27 KB)
ðŸ“„ vhost_types.h(3.9 KB)
ðŸ“„ videodev2.h(88.61 KB)
ðŸ“„ virtio_9p.h(1.99 KB)
ðŸ“„ virtio_balloon.h(5.15 KB)
ðŸ“„ virtio_blk.h(6.64 KB)
ðŸ“„ virtio_bt.h(772 B)
ðŸ“„ virtio_config.h(3.91 KB)
ðŸ“„ virtio_console.h(3.06 KB)
ðŸ“„ virtio_crypto.h(13.55 KB)
ðŸ“„ virtio_fs.h(572 B)
ðŸ“„ virtio_gpu.h(11.19 KB)
ðŸ“„ virtio_ids.h(3.19 KB)
ðŸ“„ virtio_input.h(2.45 KB)
ðŸ“„ virtio_iommu.h(3.69 KB)
ðŸ“„ virtio_mem.h(6.99 KB)
ðŸ“„ virtio_mmio.h(4.85 KB)
ðŸ“„ virtio_net.h(10.3 KB)
ðŸ“„ virtio_pci.h(7.23 KB)
ðŸ“„ virtio_ring.h(7.32 KB)
ðŸ“„ virtio_rng.h(265 B)
ðŸ“„ virtio_scsi.h(5.89 KB)
ðŸ“„ virtio_snd.h(9.09 KB)
ðŸ“„ virtio_types.h(2.1 KB)
ðŸ“„ virtio_vsock.h(3.01 KB)
ðŸ“„ vm_sockets.h(6.34 KB)
ðŸ“„ vm_sockets_diag.h(963 B)
ðŸ“„ vmcore.h(431 B)
ðŸ“„ vsockmon.h(1.84 KB)
ðŸ“„ vt.h(2.99 KB)
ðŸ“„ vtpm_proxy.h(1.68 KB)
ðŸ“„ wait.h(682 B)
ðŸ“„ wanrouter.h(453 B)
ðŸ“„ watchdog.h(2.28 KB)
ðŸ“ wimax
ðŸ“„ wimax.h(8.17 KB)
ðŸ“„ wireless.h(41.7 KB)
ðŸ“„ wmi.h(1.84 KB)
ðŸ“„ x25.h(3.48 KB)
ðŸ“„ xattr.h(2.79 KB)
ðŸ“„ xdp_diag.h(1.43 KB)
ðŸ“„ xfrm.h(11.71 KB)
ðŸ“„ xilinx-v4l2-controls.h(2.91 KB)
ðŸ“„ zorro.h(3.22 KB)
ðŸ“„ zorro_ids.h(29.26 KB)

Editing: hdreg.h

/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _LINUX_HDREG_H
#define _LINUX_HDREG_H

#include <linux/types.h>

/*
 * Command Header sizes for IOCTL commands
 */

#define HDIO_DRIVE_CMD_HDR_SIZE		(4 * sizeof(__u8))
#define HDIO_DRIVE_HOB_HDR_SIZE		(8 * sizeof(__u8))
#define HDIO_DRIVE_TASK_HDR_SIZE	(8 * sizeof(__u8))

#define IDE_DRIVE_TASK_NO_DATA		0
#define IDE_DRIVE_TASK_INVALID		-1
#define IDE_DRIVE_TASK_SET_XFER		1
#define IDE_DRIVE_TASK_IN		2
#define IDE_DRIVE_TASK_OUT		3
#define IDE_DRIVE_TASK_RAW_WRITE	4

/*
 * Define standard taskfile in/out register
 */
#define IDE_TASKFILE_STD_IN_FLAGS	0xFE
#define IDE_HOB_STD_IN_FLAGS		0x3C
#define IDE_TASKFILE_STD_OUT_FLAGS	0xFE
#define IDE_HOB_STD_OUT_FLAGS		0x3C

typedef unsigned char task_ioreg_t;
typedef unsigned long sata_ioreg_t;

typedef union ide_reg_valid_s {
	unsigned all				: 16;
	struct {
		unsigned data			: 1;
		unsigned error_feature		: 1;
		unsigned sector			: 1;
		unsigned nsector		: 1;
		unsigned lcyl			: 1;
		unsigned hcyl			: 1;
		unsigned select			: 1;
		unsigned status_command		: 1;

unsigned data_hob		: 1;
		unsigned error_feature_hob	: 1;
		unsigned sector_hob		: 1;
		unsigned nsector_hob		: 1;
		unsigned lcyl_hob		: 1;
		unsigned hcyl_hob		: 1;
		unsigned select_hob		: 1;
		unsigned control_hob		: 1;
	} b;
} ide_reg_valid_t;

typedef struct ide_task_request_s {
	__u8		io_ports[8];
	__u8		hob_ports[8]; /* bytes 6 and 7 are unused */
	ide_reg_valid_t	out_flags;
	ide_reg_valid_t	in_flags;
	int		data_phase;
	int		req_cmd;
	unsigned long	out_size;
	unsigned long	in_size;
} ide_task_request_t;

typedef struct ide_ioctl_request_s {
	ide_task_request_t	*task_request;
	unsigned char		*out_buffer;
	unsigned char		*in_buffer;
} ide_ioctl_request_t;

struct hd_drive_cmd_hdr {
	__u8 command;
	__u8 sector_number;
	__u8 feature;
	__u8 sector_count;
};

typedef struct hd_drive_task_hdr {
	__u8 data;
	__u8 feature;
	__u8 sector_count;
	__u8 sector_number;
	__u8 low_cylinder;
	__u8 high_cylinder;
	__u8 device_head;
	__u8 command;
} task_struct_t;

typedef struct hd_drive_hob_hdr {
	__u8 data;
	__u8 feature;
	__u8 sector_count;
	__u8 sector_number;
	__u8 low_cylinder;
	__u8 high_cylinder;
	__u8 device_head;
	__u8 control;
} hob_struct_t;

#define TASKFILE_NO_DATA		0x0000

#define TASKFILE_IN			0x0001
#define TASKFILE_MULTI_IN		0x0002

#define TASKFILE_OUT			0x0004
#define TASKFILE_MULTI_OUT		0x0008
#define TASKFILE_IN_OUT			0x0010

#define TASKFILE_IN_DMA			0x0020
#define TASKFILE_OUT_DMA		0x0040
#define TASKFILE_IN_DMAQ		0x0080
#define TASKFILE_OUT_DMAQ		0x0100

#define TASKFILE_P_IN			0x0200
#define TASKFILE_P_OUT			0x0400
#define TASKFILE_P_IN_DMA		0x0800
#define TASKFILE_P_OUT_DMA		0x1000
#define TASKFILE_P_IN_DMAQ		0x2000
#define TASKFILE_P_OUT_DMAQ		0x4000
#define TASKFILE_48			0x8000
#define TASKFILE_INVALID		0x7fff

/* ATA/ATAPI Commands pre T13 Spec */
#define WIN_NOP				0x00
/*
 *	0x01->0x02 Reserved
 */
#define CFA_REQ_EXT_ERROR_CODE		0x03 /* CFA Request Extended Error Code */
/*
 *	0x04->0x07 Reserved
 */
#define WIN_SRST			0x08 /* ATAPI soft reset command */
#define WIN_DEVICE_RESET		0x08
/*
 *	0x09->0x0F Reserved
 */
#define WIN_RECAL			0x10
#define WIN_RESTORE			WIN_RECAL
/*
 *	0x10->0x1F Reserved
 */
#define WIN_READ			0x20 /* 28-Bit */
#define WIN_READ_ONCE			0x21 /* 28-Bit without retries */
#define WIN_READ_LONG			0x22 /* 28-Bit */
#define WIN_READ_LONG_ONCE		0x23 /* 28-Bit without retries */
#define WIN_READ_EXT			0x24 /* 48-Bit */
#define WIN_READDMA_EXT			0x25 /* 48-Bit */
#define WIN_READDMA_QUEUED_EXT		0x26 /* 48-Bit */
#define WIN_READ_NATIVE_MAX_EXT		0x27 /* 48-Bit */
/*
 *	0x28
 */
#define WIN_MULTREAD_EXT		0x29 /* 48-Bit */
/*
 *	0x2A->0x2F Reserved
 */
#define WIN_WRITE			0x30 /* 28-Bit */
#define WIN_WRITE_ONCE			0x31 /* 28-Bit without retries */
#define WIN_WRITE_LONG			0x32 /* 28-Bit */
#define WIN_WRITE_LONG_ONCE		0x33 /* 28-Bit without retries */
#define WIN_WRITE_EXT			0x34 /* 48-Bit */
#define WIN_WRITEDMA_EXT		0x35 /* 48-Bit */
#define WIN_WRITEDMA_QUEUED_EXT		0x36 /* 48-Bit */
#define WIN_SET_MAX_EXT			0x37 /* 48-Bit */
#define CFA_WRITE_SECT_WO_ERASE		0x38 /* CFA Write Sectors without erase */
#define WIN_MULTWRITE_EXT		0x39 /* 48-Bit */
/*
 *	0x3A->0x3B Reserved
 */
#define WIN_WRITE_VERIFY		0x3C /* 28-Bit */
/*
 *	0x3D->0x3F Reserved
 */
#define WIN_VERIFY			0x40 /* 28-Bit - Read Verify Sectors */
#define WIN_VERIFY_ONCE			0x41 /* 28-Bit - without retries */
#define WIN_VERIFY_EXT			0x42 /* 48-Bit */
/*
 *	0x43->0x4F Reserved
 */
#define WIN_FORMAT			0x50
/*
 *	0x51->0x5F Reserved
 */
#define WIN_INIT			0x60
/*
 *	0x61->0x5F Reserved
 */
#define WIN_SEEK			0x70 /* 0x70-0x7F Reserved */

#define CFA_TRANSLATE_SECTOR		0x87 /* CFA Translate Sector */
#define WIN_DIAGNOSE			0x90
#define WIN_SPECIFY			0x91 /* set drive geometry translation */
#define WIN_DOWNLOAD_MICROCODE		0x92
#define WIN_STANDBYNOW2			0x94
#define WIN_STANDBY2			0x96
#define WIN_SETIDLE2			0x97
#define WIN_CHECKPOWERMODE2		0x98
#define WIN_SLEEPNOW2			0x99
/*
 *	0x9A VENDOR
 */
#define WIN_PACKETCMD			0xA0 /* Send a packet command. */
#define WIN_PIDENTIFY			0xA1 /* identify ATAPI device	*/
#define WIN_QUEUED_SERVICE		0xA2
#define WIN_SMART			0xB0 /* self-monitoring and reporting */
#define CFA_ERASE_SECTORS		0xC0
#define WIN_MULTREAD			0xC4 /* read sectors using multiple mode*/
#define WIN_MULTWRITE			0xC5 /* write sectors using multiple mode */
#define WIN_SETMULT			0xC6 /* enable/disable multiple mode */
#define WIN_READDMA_QUEUED		0xC7 /* read sectors using Queued DMA transfers */
#define WIN_READDMA			0xC8 /* read sectors using DMA transfers */
#define WIN_READDMA_ONCE		0xC9 /* 28-Bit - without retries */
#define WIN_WRITEDMA			0xCA /* write sectors using DMA transfers */
#define WIN_WRITEDMA_ONCE		0xCB /* 28-Bit - without retries */
#define WIN_WRITEDMA_QUEUED		0xCC /* write sectors using Queued DMA transfers */
#define CFA_WRITE_MULTI_WO_ERASE	0xCD /* CFA Write multiple without erase */
#define WIN_GETMEDIASTATUS		0xDA
#define WIN_ACKMEDIACHANGE		0xDB /* ATA-1, ATA-2 vendor */
#define WIN_POSTBOOT			0xDC
#define WIN_PREBOOT 			0xDD
#define WIN_DOORLOCK			0xDE /* lock door on removable drives */
#define WIN_DOORUNLOCK			0xDF /* unlock door on removable drives */
#define WIN_STANDBYNOW1			0xE0
#define WIN_IDLEIMMEDIATE		0xE1 /* force drive to become "ready" */
#define WIN_STANDBY			0xE2 /* Set device in Standby Mode */
#define WIN_SETIDLE1			0xE3
#define WIN_READ_BUFFER			0xE4 /* force read only 1 sector */
#define WIN_CHECKPOWERMODE1		0xE5
#define WIN_SLEEPNOW1			0xE6
#define WIN_FLUSH_CACHE			0xE7
#define WIN_WRITE_BUFFER		0xE8 /* force write only 1 sector */
#define WIN_WRITE_SAME			0xE9 /* read ata-2 to use */
	/* SET_FEATURES 0x22 or 0xDD */
#define WIN_FLUSH_CACHE_EXT		0xEA /* 48-Bit */
#define WIN_IDENTIFY			0xEC /* ask drive to identify itself	*/
#define WIN_MEDIAEJECT			0xED
#define WIN_IDENTIFY_DMA		0xEE /* same as WIN_IDENTIFY, but DMA */
#define WIN_SETFEATURES			0xEF /* set special drive features */
#define EXABYTE_ENABLE_NEST		0xF0
#define WIN_SECURITY_SET_PASS		0xF1
#define WIN_SECURITY_UNLOCK		0xF2
#define WIN_SECURITY_ERASE_PREPARE	0xF3
#define WIN_SECURITY_ERASE_UNIT		0xF4
#define WIN_SECURITY_FREEZE_LOCK	0xF5
#define WIN_SECURITY_DISABLE		0xF6
#define WIN_READ_NATIVE_MAX		0xF8 /* return the native maximum address */
#define WIN_SET_MAX			0xF9
#define DISABLE_SEAGATE			0xFB

/* WIN_SMART sub-commands */

#define SMART_READ_VALUES		0xD0
#define SMART_READ_THRESHOLDS		0xD1
#define SMART_AUTOSAVE			0xD2
#define SMART_SAVE			0xD3
#define SMART_IMMEDIATE_OFFLINE		0xD4
#define SMART_READ_LOG_SECTOR		0xD5
#define SMART_WRITE_LOG_SECTOR		0xD6
#define SMART_WRITE_THRESHOLDS		0xD7
#define SMART_ENABLE			0xD8
#define SMART_DISABLE			0xD9
#define SMART_STATUS			0xDA
#define SMART_AUTO_OFFLINE		0xDB

/* Password used in TF4 & TF5 executing SMART commands */

#define SMART_LCYL_PASS			0x4F
#define SMART_HCYL_PASS			0xC2

/* WIN_SETFEATURES sub-commands */
#define SETFEATURES_EN_8BIT	0x01	/* Enable 8-Bit Transfers */
#define SETFEATURES_EN_WCACHE	0x02	/* Enable write cache */
#define SETFEATURES_DIS_DEFECT	0x04	/* Disable Defect Management */
#define SETFEATURES_EN_APM	0x05	/* Enable advanced power management */
#define SETFEATURES_EN_SAME_R	0x22	/* for a region ATA-1 */
#define SETFEATURES_DIS_MSN	0x31	/* Disable Media Status Notification */
#define SETFEATURES_DIS_RETRY	0x33	/* Disable Retry */
#define SETFEATURES_EN_AAM	0x42	/* Enable Automatic Acoustic Management */
#define SETFEATURES_RW_LONG	0x44	/* Set Length of VS bytes */
#define SETFEATURES_SET_CACHE	0x54	/* Set Cache segments to SC Reg. Val */
#define SETFEATURES_DIS_RLA	0x55	/* Disable read look-ahead feature */
#define SETFEATURES_EN_RI	0x5D	/* Enable release interrupt */
#define SETFEATURES_EN_SI	0x5E	/* Enable SERVICE interrupt */
#define SETFEATURES_DIS_RPOD	0x66	/* Disable reverting to power on defaults */
#define SETFEATURES_DIS_ECC	0x77	/* Disable ECC byte count */
#define SETFEATURES_DIS_8BIT	0x81	/* Disable 8-Bit Transfers */
#define SETFEATURES_DIS_WCACHE	0x82	/* Disable write cache */
#define SETFEATURES_EN_DEFECT	0x84	/* Enable Defect Management */
#define SETFEATURES_DIS_APM	0x85	/* Disable advanced power management */
#define SETFEATURES_EN_ECC	0x88	/* Enable ECC byte count */
#define SETFEATURES_EN_MSN	0x95	/* Enable Media Status Notification */
#define SETFEATURES_EN_RETRY	0x99	/* Enable Retry */
#define SETFEATURES_EN_RLA	0xAA	/* Enable read look-ahead feature */
#define SETFEATURES_PREFETCH	0xAB	/* Sets drive prefetch value */
#define SETFEATURES_EN_REST	0xAC	/* ATA-1 */
#define SETFEATURES_4B_RW_LONG	0xBB	/* Set Length of 4 bytes */
#define SETFEATURES_DIS_AAM	0xC2	/* Disable Automatic Acoustic Management */
#define SETFEATURES_EN_RPOD	0xCC	/* Enable reverting to power on defaults */
#define SETFEATURES_DIS_RI	0xDD	/* Disable release interrupt ATAPI */
#define SETFEATURES_EN_SAME_M	0xDD	/* for a entire device ATA-1 */
#define SETFEATURES_DIS_SI	0xDE	/* Disable SERVICE interrupt ATAPI */

/* WIN_SECURITY sub-commands */

#define SECURITY_SET_PASSWORD		0xBA
#define SECURITY_UNLOCK			0xBB
#define SECURITY_ERASE_PREPARE		0xBC
#define SECURITY_ERASE_UNIT		0xBD
#define SECURITY_FREEZE_LOCK		0xBE
#define SECURITY_DISABLE_PASSWORD	0xBF

struct hd_geometry {
      unsigned char heads;
      unsigned char sectors;
      unsigned short cylinders;
      unsigned long start;
};

/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */
#define HDIO_GETGEO		0x0301	/* get device geometry */
#define HDIO_GET_UNMASKINTR	0x0302	/* get current unmask setting */
#define HDIO_GET_MULTCOUNT	0x0304	/* get current IDE blockmode setting */
#define HDIO_GET_QDMA		0x0305	/* get use-qdma flag */

#define HDIO_SET_XFER		0x0306  /* set transfer rate via proc */

#define HDIO_OBSOLETE_IDENTITY	0x0307	/* OBSOLETE, DO NOT USE: returns 142 bytes */
#define HDIO_GET_KEEPSETTINGS	0x0308	/* get keep-settings-on-reset flag */
#define HDIO_GET_32BIT		0x0309	/* get current io_32bit setting */
#define HDIO_GET_NOWERR		0x030a	/* get ignore-write-error flag */
#define HDIO_GET_DMA		0x030b	/* get use-dma flag */
#define HDIO_GET_NICE		0x030c	/* get nice flags */
#define HDIO_GET_IDENTITY	0x030d	/* get IDE identification info */
#define HDIO_GET_WCACHE		0x030e	/* get write cache mode on|off */
#define HDIO_GET_ACOUSTIC	0x030f	/* get acoustic value */
#define	HDIO_GET_ADDRESS	0x0310	/* */

#define HDIO_GET_BUSSTATE	0x031a	/* get the bus state of the hwif */
#define HDIO_TRISTATE_HWIF	0x031b	/* execute a channel tristate */
#define HDIO_DRIVE_RESET	0x031c	/* execute a device reset */
#define HDIO_DRIVE_TASKFILE	0x031d	/* execute raw taskfile */
#define HDIO_DRIVE_TASK		0x031e	/* execute task and special drive command */
#define HDIO_DRIVE_CMD		0x031f	/* execute a special drive command */
#define HDIO_DRIVE_CMD_AEB	HDIO_DRIVE_TASK

/* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */
#define HDIO_SET_MULTCOUNT	0x0321	/* change IDE blockmode */
#define HDIO_SET_UNMASKINTR	0x0322	/* permit other irqs during I/O */
#define HDIO_SET_KEEPSETTINGS	0x0323	/* keep ioctl settings on reset */
#define HDIO_SET_32BIT		0x0324	/* change io_32bit flags */
#define HDIO_SET_NOWERR		0x0325	/* change ignore-write-error flag */
#define HDIO_SET_DMA		0x0326	/* change use-dma flag */
#define HDIO_SET_PIO_MODE	0x0327	/* reconfig interface to new speed */
#define HDIO_SCAN_HWIF		0x0328	/* register and (re)scan interface */
#define HDIO_UNREGISTER_HWIF	0x032a  /* unregister interface */
#define HDIO_SET_NICE		0x0329	/* set nice flags */
#define HDIO_SET_WCACHE		0x032b	/* change write cache enable-disable */
#define HDIO_SET_ACOUSTIC	0x032c	/* change acoustic behavior */
#define HDIO_SET_BUSSTATE	0x032d	/* set the bus state of the hwif */
#define HDIO_SET_QDMA		0x032e	/* change use-qdma flag */
#define HDIO_SET_ADDRESS	0x032f	/* change lba addressing modes */

/* bus states */
enum {
	BUSSTATE_OFF = 0,
	BUSSTATE_ON,
	BUSSTATE_TRISTATE
};

/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */
/* 0x330 is reserved - used to be HDIO_GETGEO_BIG */
/* 0x331 is reserved - used to be HDIO_GETGEO_BIG_RAW */
/* 0x338 is reserved - used to be HDIO_SET_IDE_SCSI */
/* 0x339 is reserved - used to be HDIO_SET_SCSI_IDE */

#define __NEW_HD_DRIVE_ID

/*
 * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
 *
 * If you change something here, please remember to update fix_driveid() in
 * ide/probe.c.
 */
struct hd_driveid {
	unsigned short	config;		/* lots of obsolete bit flags */
	unsigned short	cyls;		/* Obsolete, "physical" cyls */
	unsigned short	reserved2;	/* reserved (word 2) */
	unsigned short	heads;		/* Obsolete, "physical" heads */
	unsigned short	track_bytes;	/* unformatted bytes per track */
	unsigned short	sector_bytes;	/* unformatted bytes per sector */
	unsigned short	sectors;	/* Obsolete, "physical" sectors per track */
	unsigned short	vendor0;	/* vendor unique */
	unsigned short	vendor1;	/* vendor unique */
	unsigned short	vendor2;	/* Retired vendor unique */
	unsigned char	serial_no[20];	/* 0 = not_specified */
	unsigned short	buf_type;	/* Retired */
	unsigned short	buf_size;	/* Retired, 512 byte increments
					 * 0 = not_specified
					 */
	unsigned short	ecc_bytes;	/* for r/w long cmds; 0 = not_specified */
	unsigned char	fw_rev[8];	/* 0 = not_specified */
	unsigned char	model[40];	/* 0 = not_specified */
	unsigned char	max_multsect;	/* 0=not_implemented */
	unsigned char	vendor3;	/* vendor unique */
	unsigned short	dword_io;	/* 0=not_implemented; 1=implemented */
	unsigned char	vendor4;	/* vendor unique */
	unsigned char	capability;	/* (upper byte of word 49)
					 *  3:	IORDYsup
					 *  2:	IORDYsw
					 *  1:	LBA
					 *  0:	DMA
					 */
	unsigned short	reserved50;	/* reserved (word 50) */
	unsigned char	vendor5;	/* Obsolete, vendor unique */
	unsigned char	tPIO;		/* Obsolete, 0=slow, 1=medium, 2=fast */
	unsigned char	vendor6;	/* Obsolete, vendor unique */
	unsigned char	tDMA;		/* Obsolete, 0=slow, 1=medium, 2=fast */
	unsigned short	field_valid;	/* (word 53)
					 *  2:	ultra_ok	word  88
					 *  1:	eide_ok		words 64-70
					 *  0:	cur_ok		words 54-58
					 */
	unsigned short	cur_cyls;	/* Obsolete, logical cylinders */
	unsigned short	cur_heads;	/* Obsolete, l heads */
	unsigned short	cur_sectors;	/* Obsolete, l sectors per track */
	unsigned short	cur_capacity0;	/* Obsolete, l total sectors on drive */
	unsigned short	cur_capacity1;	/* Obsolete, (2 words, misaligned int)     */
	unsigned char	multsect;	/* current multiple sector count */
	unsigned char	multsect_valid;	/* when (bit0==1) multsect is ok */
	unsigned int	lba_capacity;	/* Obsolete, total number of sectors */
	unsigned short	dma_1word;	/* Obsolete, single-word dma info */
	unsigned short	dma_mword;	/* multiple-word dma info */
	unsigned short  eide_pio_modes; /* bits 0:mode3 1:mode4 */
	unsigned short  eide_dma_min;	/* min mword dma cycle time (ns) */
	unsigned short  eide_dma_time;	/* recommended mword dma cycle time (ns) */
	unsigned short  eide_pio;       /* min cycle time (ns), no IORDY  */
	unsigned short  eide_pio_iordy; /* min cycle time (ns), with IORDY */
	unsigned short	words69_70[2];	/* reserved words 69-70
					 * future command overlap and queuing
					 */
	unsigned short	words71_74[4];	/* reserved words 71-74
					 * for IDENTIFY PACKET DEVICE command
					 */
	unsigned short  queue_depth;	/* (word 75)
					 * 15:5	reserved
					 *  4:0	Maximum queue depth -1
					 */
	unsigned short  words76_79[4];	/* reserved words 76-79 */
	unsigned short  major_rev_num;	/* (word 80) */
	unsigned short  minor_rev_num;	/* (word 81) */
	unsigned short  command_set_1;	/* (word 82) supported
					 * 15:	Obsolete
					 * 14:	NOP command
					 * 13:	READ_BUFFER
					 * 12:	WRITE_BUFFER
					 * 11:	Obsolete
					 * 10:	Host Protected Area
					 *  9:	DEVICE Reset
					 *  8:	SERVICE Interrupt
					 *  7:	Release Interrupt
					 *  6:	look-ahead
					 *  5:	write cache
					 *  4:	PACKET Command
					 *  3:	Power Management Feature Set
					 *  2:	Removable Feature Set
					 *  1:	Security Feature Set
					 *  0:	SMART Feature Set
					 */
	unsigned short  command_set_2;	/* (word 83)
					 * 15:	Shall be ZERO
					 * 14:	Shall be ONE
					 * 13:	FLUSH CACHE EXT
					 * 12:	FLUSH CACHE
					 * 11:	Device Configuration Overlay
					 * 10:	48-bit Address Feature Set
					 *  9:	Automatic Acoustic Management
					 *  8:	SET MAX security
					 *  7:	reserved 1407DT PARTIES
					 *  6:	SetF sub-command Power-Up
					 *  5:	Power-Up in Standby Feature Set
					 *  4:	Removable Media Notification
					 *  3:	APM Feature Set
					 *  2:	CFA Feature Set
					 *  1:	READ/WRITE DMA QUEUED
					 *  0:	Download MicroCode
					 */
	unsigned short  cfsse;		/* (word 84)
					 * cmd set-feature supported extensions
					 * 15:	Shall be ZERO
					 * 14:	Shall be ONE
					 * 13:6	reserved
					 *  5:	General Purpose Logging
					 *  4:	Streaming Feature Set
					 *  3:	Media Card Pass Through
					 *  2:	Media Serial Number Valid
					 *  1:	SMART selt-test supported
					 *  0:	SMART error logging
					 */
	unsigned short  cfs_enable_1;	/* (word 85)
					 * command set-feature enabled
					 * 15:	Obsolete
					 * 14:	NOP command
					 * 13:	READ_BUFFER
					 * 12:	WRITE_BUFFER
					 * 11:	Obsolete
					 * 10:	Host Protected Area
					 *  9:	DEVICE Reset
					 *  8:	SERVICE Interrupt
					 *  7:	Release Interrupt
					 *  6:	look-ahead
					 *  5:	write cache
					 *  4:	PACKET Command
					 *  3:	Power Management Feature Set
					 *  2:	Removable Feature Set
					 *  1:	Security Feature Set
					 *  0:	SMART Feature Set
					 */
	unsigned short  cfs_enable_2;	/* (word 86)
					 * command set-feature enabled
					 * 15:	Shall be ZERO
					 * 14:	Shall be ONE
					 * 13:	FLUSH CACHE EXT
					 * 12:	FLUSH CACHE
					 * 11:	Device Configuration Overlay
					 * 10:	48-bit Address Feature Set
					 *  9:	Automatic Acoustic Management
					 *  8:	SET MAX security
					 *  7:	reserved 1407DT PARTIES
					 *  6:	SetF sub-command Power-Up
					 *  5:	Power-Up in Standby Feature Set
					 *  4:	Removable Media Notification
					 *  3:	APM Feature Set
					 *  2:	CFA Feature Set
					 *  1:	READ/WRITE DMA QUEUED
					 *  0:	Download MicroCode
					 */
	unsigned short  csf_default;	/* (word 87)
					 * command set-feature default
					 * 15:	Shall be ZERO
					 * 14:	Shall be ONE
					 * 13:6	reserved
					 *  5:	General Purpose Logging enabled
					 *  4:	Valid CONFIGURE STREAM executed
					 *  3:	Media Card Pass Through enabled
					 *  2:	Media Serial Number Valid
					 *  1:	SMART selt-test supported
					 *  0:	SMART error logging
					 */
	unsigned short  dma_ultra;	/* (word 88) */
	unsigned short	trseuc;		/* time required for security erase */
	unsigned short	trsEuc;		/* time required for enhanced erase */
	unsigned short	CurAPMvalues;	/* current APM values */
	unsigned short	mprc;		/* master password revision code */
	unsigned short	hw_config;	/* hardware config (word 93)
					 * 15:	Shall be ZERO
					 * 14:	Shall be ONE
					 * 13:
					 * 12:
					 * 11:
					 * 10:
					 *  9:
					 *  8:
					 *  7:
					 *  6:
					 *  5:
					 *  4:
					 *  3:
					 *  2:
					 *  1:
					 *  0:	Shall be ONE
					 */
	unsigned short	acoustic;	/* (word 94)
					 * 15:8	Vendor's recommended value
					 *  7:0	current value
					 */
	unsigned short	msrqs;		/* min stream request size */
	unsigned short	sxfert;		/* stream transfer time */
	unsigned short	sal;		/* stream access latency */
	unsigned int	spg;		/* stream performance granularity */
	unsigned long long lba_capacity_2;/* 48-bit total number of sectors */
	unsigned short	words104_125[22];/* reserved words 104-125 */
	unsigned short	last_lun;	/* (word 126) */
	unsigned short	word127;	/* (word 127) Feature Set
					 * Removable Media Notification
					 * 15:2	reserved
					 *  1:0	00 = not supported
					 *	01 = supported
					 *	10 = reserved
					 *	11 = reserved
					 */
	unsigned short	dlf;		/* (word 128)
					 * device lock function
					 * 15:9	reserved
					 *  8	security level 1:max 0:high
					 *  7:6	reserved
					 *  5	enhanced erase
					 *  4	expire
					 *  3	frozen
					 *  2	locked
					 *  1	en/disabled
					 *  0	capability
					 */
	unsigned short  csfo;		/*  (word 129)
					 * current set features options
					 * 15:4	reserved
					 *  3:	auto reassign
					 *  2:	reverting
					 *  1:	read-look-ahead
					 *  0:	write cache
					 */
	unsigned short	words130_155[26];/* reserved vendor words 130-155 */
	unsigned short	word156;	/* reserved vendor word 156 */
	unsigned short	words157_159[3];/* reserved vendor words 157-159 */
	unsigned short	cfa_power;	/* (word 160) CFA Power Mode
					 * 15 word 160 supported
					 * 14 reserved
					 * 13
					 * 12
					 * 11:0
					 */
	unsigned short	words161_175[15];/* Reserved for CFA */
	unsigned short	words176_205[30];/* Current Media Serial Number */
	unsigned short	words206_254[49];/* reserved words 206-254 */
	unsigned short	integrity_word;	/* (word 255)
					 * 15:8 Checksum
					 *  7:0 Signature
					 */
};

/*
 * IDE "nice" flags. These are used on a per drive basis to determine
 * when to be nice and give more bandwidth to the other devices which
 * share the same IDE bus.
 */
#define IDE_NICE_DSC_OVERLAP	(0)	/* per the DSC overlap protocol */
#define IDE_NICE_ATAPI_OVERLAP	(1)	/* not supported yet */
#define IDE_NICE_1		(3)	/* when probably won't affect us much */
#define IDE_NICE_0		(2)	/* when sure that it won't affect us */
#define IDE_NICE_2		(4)	/* when we know it's on our expense */

#endif	/* _LINUX_HDREG_H */

X7ROOT File Manager

Editing: hdreg.h

Upload File

Create Folder