File Manager

X7ROOT File Manager

Current Path: /usr/include/linux

ðŸ“ ..
ðŸ“„ a.out.h(6.73 KB)
ðŸ“„ acct.h(3.65 KB)
ðŸ“„ adb.h(1.11 KB)
ðŸ“„ adfs_fs.h(936 B)
ðŸ“„ affs_hardblocks.h(1.51 KB)
ðŸ“„ agpgart.h(3.85 KB)
ðŸ“„ aio_abi.h(3.34 KB)
ðŸ“„ am437x-vpfe.h(3.59 KB)
ðŸ“ android
ðŸ“„ apm_bios.h(3.6 KB)
ðŸ“„ arcfb.h(213 B)
ðŸ“„ arm_sdei.h(2.69 KB)
ðŸ“„ aspeed-lpc-ctrl.h(1.74 KB)
ðŸ“„ atalk.h(1023 B)
ðŸ“„ atm.h(7.7 KB)
ðŸ“„ atm_eni.h(648 B)
ðŸ“„ atm_he.h(406 B)
ðŸ“„ atm_idt77105.h(955 B)
ðŸ“„ atm_nicstar.h(1.25 KB)
ðŸ“„ atm_tcp.h(1.58 KB)
ðŸ“„ atm_zatm.h(1.5 KB)
ðŸ“„ atmapi.h(952 B)
ðŸ“„ atmarp.h(1.27 KB)
ðŸ“„ atmbr2684.h(3.19 KB)
ðŸ“„ atmclip.h(576 B)
ðŸ“„ atmdev.h(7.5 KB)
ðŸ“„ atmioc.h(1.61 KB)
ðŸ“„ atmlec.h(2.33 KB)
ðŸ“„ atmmpc.h(4.13 KB)
ðŸ“„ atmppp.h(639 B)
ðŸ“„ atmsap.h(4.85 KB)
ðŸ“„ atmsvc.h(1.81 KB)
ðŸ“„ audit.h(19.92 KB)
ðŸ“„ auto_dev-ioctl.h(4.87 KB)
ðŸ“„ auto_fs.h(6.28 KB)
ðŸ“„ auto_fs4.h(451 B)
ðŸ“„ auxvec.h(1.56 KB)
ðŸ“„ ax25.h(2.76 KB)
ðŸ“„ b1lli.h(1.68 KB)
ðŸ“„ batadv_packet.h(20.01 KB)
ðŸ“„ batman_adv.h(11.7 KB)
ðŸ“„ baycom.h(883 B)
ðŸ“„ bcache.h(8.17 KB)
ðŸ“„ bcm933xx_hcs.h(419 B)
ðŸ“„ bfs_fs.h(1.85 KB)
ðŸ“„ binfmts.h(628 B)
ðŸ“„ blkpg.h(904 B)
ðŸ“„ blktrace_api.h(4.59 KB)
ðŸ“„ blkzoned.h(6.45 KB)
ðŸ“„ bpf.h(223.3 KB)
ðŸ“„ bpf_common.h(1.33 KB)
ðŸ“„ bpf_perf_event.h(529 B)
ðŸ“„ bpfilter.h(465 B)
ðŸ“„ bpqether.h(981 B)
ðŸ“„ bsg.h(2.44 KB)
ðŸ“„ bt-bmc.h(572 B)
ðŸ“„ btf.h(4.68 KB)
ðŸ“„ btrfs.h(28.24 KB)
ðŸ“„ btrfs_tree.h(24.69 KB)
ðŸ“ byteorder
ðŸ“ caif
ðŸ“ can
ðŸ“„ can.h(7.7 KB)
ðŸ“„ capability.h(13.2 KB)
ðŸ“„ capi.h(3.05 KB)
ðŸ“„ cciss_defs.h(3.2 KB)
ðŸ“„ cciss_ioctl.h(2.7 KB)
ðŸ“„ cdrom.h(28.18 KB)
ðŸ“„ cec-funcs.h(52.64 KB)
ðŸ“„ cec.h(36.81 KB)
ðŸ“„ cfm_bridge.h(1.42 KB)
ðŸ“„ cgroupstats.h(2.17 KB)
ðŸ“„ chio.h(5.22 KB)
ðŸ“ cifs
ðŸ“„ close_range.h(377 B)
ðŸ“„ cm4000_cs.h(1.76 KB)
ðŸ“„ cn_proc.h(3.38 KB)
ðŸ“„ coda.h(17.09 KB)
ðŸ“„ coda_psdev.h(783 B)
ðŸ“„ coff.h(12.18 KB)
ðŸ“„ connector.h(2.2 KB)
ðŸ“„ const.h(788 B)
ðŸ“„ coresight-stm.h(674 B)
ðŸ“„ cramfs_fs.h(3.47 KB)
ðŸ“„ cryptouser.h(3.31 KB)
ðŸ“„ cuda.h(905 B)
ðŸ“„ cyclades.h(16.71 KB)
ðŸ“„ cycx_cfm.h(2.92 KB)
ðŸ“„ dcbnl.h(24.65 KB)
ðŸ“„ dccp.h(6.29 KB)
ðŸ“„ devlink.h(21.05 KB)
ðŸ“„ dlm.h(2.49 KB)
ðŸ“„ dlm_device.h(2.48 KB)
ðŸ“„ dlm_netlink.h(1.13 KB)
ðŸ“„ dlm_plock.h(894 B)
ðŸ“„ dlmconstants.h(4.96 KB)
ðŸ“„ dm-ioctl.h(11.13 KB)
ðŸ“„ dm-log-userspace.h(14.83 KB)
ðŸ“„ dma-buf.h(5.12 KB)
ðŸ“„ dn.h(4.53 KB)
ðŸ“„ dqblk_xfs.h(9.03 KB)
ðŸ“ dvb
ðŸ“„ edd.h(5.47 KB)
ðŸ“„ efs_fs_sb.h(2.17 KB)
ðŸ“„ elf-em.h(2.14 KB)
ðŸ“„ elf-fdpic.h(1.1 KB)
ðŸ“„ elf.h(13.16 KB)
ðŸ“„ elfcore.h(2.92 KB)
ðŸ“„ errno.h(23 B)
ðŸ“„ errqueue.h(1.44 KB)
ðŸ“„ erspan.h(1.03 KB)
ðŸ“„ ethtool.h(81.89 KB)
ðŸ“„ ethtool_netlink.h(22.29 KB)
ðŸ“„ eventpoll.h(2.67 KB)
ðŸ“„ fadvise.h(842 B)
ðŸ“„ falloc.h(3.5 KB)
ðŸ“„ fanotify.h(5.22 KB)
ðŸ“„ fb.h(16.09 KB)
ðŸ“„ fcntl.h(4.08 KB)
ðŸ“„ fd.h(11.4 KB)
ðŸ“„ fdreg.h(5.29 KB)
ðŸ“„ fib_rules.h(1.99 KB)
ðŸ“„ fiemap.h(2.71 KB)
ðŸ“„ filter.h(2.16 KB)
ðŸ“„ firewire-cdev.h(42.86 KB)
ðŸ“„ firewire-constants.h(3.16 KB)
ðŸ“„ flat.h(2.1 KB)
ðŸ“„ fou.h(694 B)
ðŸ“„ fpga-dfl.h(8.52 KB)
ðŸ“„ fs.h(13.11 KB)
ðŸ“„ fsl_hypervisor.h(7.13 KB)
ðŸ“„ fsmap.h(4.29 KB)
ðŸ“„ fuse.h(22.92 KB)
ðŸ“„ futex.h(4.88 KB)
ðŸ“„ gameport.h(897 B)
ðŸ“„ gen_stats.h(1.49 KB)
ðŸ“„ genetlink.h(2.12 KB)
ðŸ“ genwqe
ðŸ“„ gfs2_ondisk.h(14.4 KB)
ðŸ“„ gigaset_dev.h(1.41 KB)
ðŸ“„ gpio.h(6.59 KB)
ðŸ“„ gsmmux.h(1.02 KB)
ðŸ“„ gtp.h(681 B)
ðŸ“„ hash_info.h(921 B)
ðŸ“ hdlc
ðŸ“„ hdlc.h(637 B)
ðŸ“„ hdlcdrv.h(2.84 KB)
ðŸ“„ hdreg.h(22.17 KB)
ðŸ“„ hid.h(1.86 KB)
ðŸ“„ hiddev.h(6.2 KB)
ðŸ“„ hidraw.h(1.95 KB)
ðŸ“„ hpet.h(743 B)
ðŸ“ hsi
ðŸ“„ hsr_netlink.h(1.06 KB)
ðŸ“„ hw_breakpoint.h(742 B)
ðŸ“„ hyperv.h(10.89 KB)
ðŸ“„ hysdn_if.h(1.35 KB)
ðŸ“„ i2c-dev.h(2.55 KB)
ðŸ“„ i2c.h(6.96 KB)
ðŸ“„ i2o-dev.h(11.28 KB)
ðŸ“„ i8k.h(1.49 KB)
ðŸ“„ icmp.h(2.91 KB)
ðŸ“„ icmpv6.h(3.94 KB)
ðŸ“„ idxd.h(8.22 KB)
ðŸ“„ if.h(10.65 KB)
ðŸ“„ if_addr.h(1.84 KB)
ðŸ“„ if_addrlabel.h(721 B)
ðŸ“„ if_alg.h(946 B)
ðŸ“„ if_arcnet.h(3.63 KB)
ðŸ“„ if_arp.h(6.42 KB)
ðŸ“„ if_bonding.h(5.17 KB)
ðŸ“„ if_bridge.h(19.06 KB)
ðŸ“„ if_cablemodem.h(986 B)
ðŸ“„ if_eql.h(1.32 KB)
ðŸ“„ if_ether.h(8.05 KB)
ðŸ“„ if_fc.h(1.7 KB)
ðŸ“„ if_fddi.h(3.66 KB)
ðŸ“„ if_frad.h(2.95 KB)
ðŸ“„ if_hippi.h(4.14 KB)
ðŸ“„ if_infiniband.h(1.22 KB)
ðŸ“„ if_link.h(30.28 KB)
ðŸ“„ if_ltalk.h(210 B)
ðŸ“„ if_macsec.h(5.7 KB)
ðŸ“„ if_packet.h(7.73 KB)
ðŸ“„ if_phonet.h(424 B)
ðŸ“„ if_plip.h(660 B)
ðŸ“„ if_ppp.h(29 B)
ðŸ“„ if_pppol2tp.h(3.21 KB)
ðŸ“„ if_pppox.h(4.76 KB)
ðŸ“„ if_slip.h(872 B)
ðŸ“„ if_team.h(2.54 KB)
ðŸ“„ if_tun.h(4 KB)
ðŸ“„ if_tunnel.h(4.41 KB)
ðŸ“„ if_vlan.h(1.79 KB)
ðŸ“„ if_x25.h(881 B)
ðŸ“„ if_xdp.h(2.94 KB)
ðŸ“„ ife.h(351 B)
ðŸ“„ igmp.h(2.99 KB)
ðŸ“ iio
ðŸ“„ ila.h(1.22 KB)
ðŸ“„ in.h(9.78 KB)
ðŸ“„ in6.h(7.26 KB)
ðŸ“„ in_route.h(936 B)
ðŸ“„ inet_diag.h(4.56 KB)
ðŸ“„ inotify.h(3.21 KB)
ðŸ“„ input-event-codes.h(27.94 KB)
ðŸ“„ input.h(15.61 KB)
ðŸ“„ io_uring.h(6.06 KB)
ðŸ“„ ioctl.h(163 B)
ðŸ“„ iommu.h(4.79 KB)
ðŸ“„ ip.h(4.62 KB)
ðŸ“„ ip6_tunnel.h(1.91 KB)
ðŸ“„ ip_vs.h(13.31 KB)
ðŸ“„ ipc.h(2.05 KB)
ðŸ“„ ipmi.h(15.08 KB)
ðŸ“„ ipmi_bmc.h(464 B)
ðŸ“„ ipmi_msgdefs.h(3.35 KB)
ðŸ“„ ipmi_ssif_bmc.h(441 B)
ðŸ“„ ipsec.h(947 B)
ðŸ“„ ipv6.h(3.87 KB)
ðŸ“„ ipv6_route.h(1.86 KB)
ðŸ“„ ipx.h(2.29 KB)
ðŸ“„ irqnr.h(104 B)
ðŸ“ isdn
ðŸ“„ isdn.h(5.64 KB)
ðŸ“„ isdn_divertif.h(1.17 KB)
ðŸ“„ isdn_ppp.h(1.88 KB)
ðŸ“„ isdnif.h(2.31 KB)
ðŸ“„ iso_fs.h(6.33 KB)
ðŸ“„ isst_if.h(5.26 KB)
ðŸ“„ ivtv.h(2.95 KB)
ðŸ“„ ivtvfb.h(1.18 KB)
ðŸ“„ jffs2.h(6.85 KB)
ðŸ“„ joystick.h(3.35 KB)
ðŸ“„ kcm.h(822 B)
ðŸ“„ kcmp.h(522 B)
ðŸ“„ kcov.h(1.07 KB)
ðŸ“„ kd.h(6.11 KB)
ðŸ“„ kdev_t.h(383 B)
ðŸ“„ kernel-page-flags.h(900 B)
ðŸ“„ kernel.h(438 B)
ðŸ“„ kernelcapi.h(1019 B)
ðŸ“„ kexec.h(1.79 KB)
ðŸ“„ keyboard.h(12.48 KB)
ðŸ“„ keyctl.h(3.42 KB)
ðŸ“„ kfd_ioctl.h(28.14 KB)
ðŸ“„ kfd_sysfs.h(4.25 KB)
ðŸ“„ kvm.h(60.12 KB)
ðŸ“„ kvm_para.h(1001 B)
ðŸ“„ l2tp.h(5.46 KB)
ðŸ“„ libc-compat.h(8.09 KB)
ðŸ“„ lightnvm.h(4.92 KB)
ðŸ“„ limits.h(937 B)
ðŸ“„ lirc.h(7.63 KB)
ðŸ“„ llc.h(3.09 KB)
ðŸ“„ loop.h(3.42 KB)
ðŸ“„ lp.h(4.09 KB)
ðŸ“„ lwtunnel.h(2.13 KB)
ðŸ“„ magic.h(3.45 KB)
ðŸ“„ major.h(4.6 KB)
ðŸ“„ map_to_7segment.h(7.08 KB)
ðŸ“„ matroxfb.h(1.43 KB)
ðŸ“„ max2175.h(1.01 KB)
ðŸ“„ mdio.h(16.87 KB)
ðŸ“„ media-bus-format.h(6.26 KB)
ðŸ“„ media.h(11.12 KB)
ðŸ“„ mei.h(3.39 KB)
ðŸ“„ membarrier.h(7.71 KB)
ðŸ“„ memfd.h(1.29 KB)
ðŸ“„ mempolicy.h(2.18 KB)
ðŸ“„ meye.h(2.47 KB)
ðŸ“„ mic_common.h(6.37 KB)
ðŸ“„ mic_ioctl.h(2.2 KB)
ðŸ“„ mii.h(9.27 KB)
ðŸ“„ minix_fs.h(2.07 KB)
ðŸ“„ mman.h(1.35 KB)
ðŸ“ mmc
ðŸ“„ mmtimer.h(2.07 KB)
ðŸ“„ module.h(255 B)
ðŸ“„ mount.h(4.44 KB)
ðŸ“„ mpls.h(2.25 KB)
ðŸ“„ mpls_iptunnel.h(761 B)
ðŸ“„ mptcp.h(5.48 KB)
ðŸ“„ mqueue.h(2.15 KB)
ðŸ“„ mroute.h(5.3 KB)
ðŸ“„ mroute6.h(4.47 KB)
ðŸ“„ mrp_bridge.h(1.67 KB)
ðŸ“„ msdos_fs.h(6.8 KB)
ðŸ“„ msg.h(3.29 KB)
ðŸ“„ mtio.h(7.98 KB)
ðŸ“„ n_r3964.h(2.35 KB)
ðŸ“„ nbd-netlink.h(2.35 KB)
ðŸ“„ nbd.h(2.95 KB)
ðŸ“„ ncsi.h(3.79 KB)
ðŸ“„ ndctl.h(6.71 KB)
ðŸ“„ neighbour.h(5.02 KB)
ðŸ“„ net.h(2.04 KB)
ðŸ“„ net_dropmon.h(2.85 KB)
ðŸ“„ net_namespace.h(715 B)
ðŸ“„ net_tstamp.h(5.67 KB)
ðŸ“„ netconf.h(614 B)
ðŸ“„ netdevice.h(2.2 KB)
ðŸ“ netfilter
ðŸ“„ netfilter.h(1.78 KB)
ðŸ“ netfilter_arp
ðŸ“„ netfilter_arp.h(445 B)
ðŸ“ netfilter_bridge
ðŸ“„ netfilter_bridge.h(1.14 KB)
ðŸ“„ netfilter_decnet.h(1.93 KB)
ðŸ“ netfilter_ipv4
ðŸ“„ netfilter_ipv4.h(2.12 KB)
ðŸ“ netfilter_ipv6
ðŸ“„ netfilter_ipv6.h(2.14 KB)
ðŸ“„ netlink.h(11.23 KB)
ðŸ“„ netlink_diag.h(1.49 KB)
ðŸ“„ netrom.h(807 B)
ðŸ“„ nexthop.h(1.5 KB)
ðŸ“„ nfc.h(10.95 KB)
ðŸ“„ nfs.h(4.39 KB)
ðŸ“„ nfs2.h(1.43 KB)
ðŸ“„ nfs3.h(2.4 KB)
ðŸ“„ nfs4.h(6.44 KB)
ðŸ“„ nfs4_mount.h(1.89 KB)
ðŸ“„ nfs_fs.h(1.6 KB)
ðŸ“„ nfs_idmap.h(2.19 KB)
ðŸ“„ nfs_mount.h(2.09 KB)
ðŸ“„ nfsacl.h(718 B)
ðŸ“ nfsd
ðŸ“„ nilfs2_api.h(7.41 KB)
ðŸ“„ nilfs2_ondisk.h(17.61 KB)
ðŸ“„ nitro_enclaves.h(12.84 KB)
ðŸ“„ nl80211.h(327.41 KB)
ðŸ“„ nsfs.h(639 B)
ðŸ“„ nubus.h(8 KB)
ðŸ“„ nvme_ioctl.h(2.06 KB)
ðŸ“„ nvram.h(532 B)
ðŸ“„ omap3isp.h(20.36 KB)
ðŸ“„ omapfb.h(5.78 KB)
ðŸ“„ oom.h(511 B)
ðŸ“„ openat2.h(1.26 KB)
ðŸ“„ openvswitch.h(39.24 KB)
ðŸ“„ packet_diag.h(1.63 KB)
ðŸ“„ param.h(141 B)
ðŸ“„ parport.h(3.56 KB)
ðŸ“„ patchkey.h(892 B)
ðŸ“„ pci.h(1.35 KB)
ðŸ“„ pci_regs.h(56.47 KB)
ðŸ“„ pcitest.h(711 B)
ðŸ“„ perf_event.h(39.63 KB)
ðŸ“„ personality.h(2.05 KB)
ðŸ“„ pfkeyv2.h(10.32 KB)
ðŸ“„ pfrut.h(7.8 KB)
ðŸ“„ pg.h(2.34 KB)
ðŸ“„ phantom.h(1.62 KB)
ðŸ“„ phonet.h(4.57 KB)
ðŸ“„ pkt_cls.h(18.08 KB)
ðŸ“„ pkt_sched.h(29.59 KB)
ðŸ“„ pktcdvd.h(2.62 KB)
ðŸ“„ pmu.h(5.19 KB)
ðŸ“„ poll.h(22 B)
ðŸ“„ posix_acl.h(1.22 KB)
ðŸ“„ posix_acl_xattr.h(1.09 KB)
ðŸ“„ posix_types.h(1.07 KB)
ðŸ“„ ppdev.h(3.14 KB)
ðŸ“„ ppp-comp.h(2.47 KB)
ðŸ“„ ppp-ioctl.h(5.35 KB)
ðŸ“„ ppp_defs.h(4.99 KB)
ðŸ“„ pps.h(4.62 KB)
ðŸ“„ pr.h(1.05 KB)
ðŸ“„ prctl.h(7.83 KB)
ðŸ“„ psample.h(2.22 KB)
ðŸ“„ psci.h(4.23 KB)
ðŸ“„ psp-sev.h(4.48 KB)
ðŸ“„ ptp_clock.h(7.28 KB)
ðŸ“„ ptrace.h(3.59 KB)
ðŸ“„ qemu_fw_cfg.h(2.41 KB)
ðŸ“„ qnx4_fs.h(2.27 KB)
ðŸ“„ qnxtypes.h(624 B)
ðŸ“„ qrtr.h(893 B)
ðŸ“„ quota.h(6.14 KB)
ðŸ“„ radeonfb.h(360 B)
ðŸ“ raid
ðŸ“„ random.h(1.34 KB)
ðŸ“„ raw.h(365 B)
ðŸ“„ rds.h(9.08 KB)
ðŸ“„ reboot.h(1.31 KB)
ðŸ“„ reiserfs_fs.h(775 B)
ðŸ“„ reiserfs_xattr.h(533 B)
ðŸ“„ resource.h(2.29 KB)
ðŸ“„ rfkill.h(6.45 KB)
ðŸ“„ rio_cm_cdev.h(3.17 KB)
ðŸ“„ rio_mport_cdev.h(9.11 KB)
ðŸ“„ romfs_fs.h(1.21 KB)
ðŸ“„ rose.h(2.18 KB)
ðŸ“„ route.h(2.28 KB)
ðŸ“„ rpmsg.h(544 B)
ðŸ“„ rseq.h(4.79 KB)
ðŸ“„ rtc.h(3.92 KB)
ðŸ“„ rtnetlink.h(19.73 KB)
ðŸ“„ rxrpc.h(4.96 KB)
ðŸ“„ scc.h(4.49 KB)
ðŸ“ sched
ðŸ“„ sched.h(2.73 KB)
ðŸ“„ scif_ioctl.h(6.23 KB)
ðŸ“„ screen_info.h(2.42 KB)
ðŸ“„ sctp.h(35.15 KB)
ðŸ“„ sdla.h(2.77 KB)
ðŸ“„ seccomp.h(2.2 KB)
ðŸ“„ securebits.h(2.64 KB)
ðŸ“„ sed-opal.h(3.2 KB)
ðŸ“„ seg6.h(1.14 KB)
ðŸ“„ seg6_genl.h(589 B)
ðŸ“„ seg6_hmac.h(423 B)
ðŸ“„ seg6_iptunnel.h(927 B)
ðŸ“„ seg6_local.h(2.01 KB)
ðŸ“„ selinux_netlink.h(1.17 KB)
ðŸ“„ sem.h(2.97 KB)
ðŸ“„ serial.h(3.78 KB)
ðŸ“„ serial_core.h(6.1 KB)
ðŸ“„ serial_reg.h(15.13 KB)
ðŸ“„ serio.h(1.99 KB)
ðŸ“„ sev-guest.h(2.25 KB)
ðŸ“„ shm.h(3.7 KB)
ðŸ“„ signal.h(388 B)
ðŸ“„ signalfd.h(1.2 KB)
ðŸ“„ smc.h(8.31 KB)
ðŸ“„ smc_diag.h(2.66 KB)
ðŸ“„ smiapp.h(1.03 KB)
ðŸ“„ snmp.h(13.34 KB)
ðŸ“„ sock_diag.h(1.27 KB)
ðŸ“„ socket.h(901 B)
ðŸ“„ sockios.h(5.96 KB)
ðŸ“„ sonet.h(2.24 KB)
ðŸ“„ sonypi.h(5.18 KB)
ðŸ“„ sound.h(1.21 KB)
ðŸ“„ soundcard.h(44.96 KB)
ðŸ“ spi
ðŸ“„ stat.h(6.2 KB)
ðŸ“„ stddef.h(1.5 KB)
ðŸ“„ stm.h(1.25 KB)
ðŸ“„ string.h(238 B)
ðŸ“ sunrpc
ðŸ“„ suspend_ioctls.h(1.4 KB)
ðŸ“„ swab.h(6.76 KB)
ðŸ“„ switchtec_ioctl.h(5.14 KB)
ðŸ“„ sync_file.h(2.82 KB)
ðŸ“„ synclink.h(8.77 KB)
ðŸ“„ sysctl.h(25.24 KB)
ðŸ“„ sysinfo.h(1.02 KB)
ðŸ“„ target_core_user.h(4.52 KB)
ðŸ“„ taskstats.h(7.01 KB)
ðŸ“ tc_act
ðŸ“ tc_ematch
ðŸ“„ tcp.h(9.69 KB)
ðŸ“„ tcp_metrics.h(1.51 KB)
ðŸ“„ tdx-guest.h(1.27 KB)
ðŸ“„ tee.h(12.86 KB)
ðŸ“„ termios.h(506 B)
ðŸ“„ thermal.h(3.23 KB)
ðŸ“„ time.h(1.71 KB)
ðŸ“„ time_types.h(1.15 KB)
ðŸ“„ timerfd.h(936 B)
ðŸ“„ times.h(278 B)
ðŸ“„ timex.h(6.25 KB)
ðŸ“„ tiocl.h(1.69 KB)
ðŸ“„ tipc.h(8.62 KB)
ðŸ“„ tipc_config.h(14.36 KB)
ðŸ“„ tipc_netlink.h(9.17 KB)
ðŸ“„ tipc_sockets_diag.h(468 B)
ðŸ“„ tls.h(4.19 KB)
ðŸ“„ toshiba.h(1.88 KB)
ðŸ“„ tty.h(1.55 KB)
ðŸ“„ tty_flags.h(4.42 KB)
ðŸ“„ types.h(1.44 KB)
ðŸ“„ udf_fs_i.h(697 B)
ðŸ“„ udp.h(1.62 KB)
ðŸ“„ uhid.h(4.54 KB)
ðŸ“„ uinput.h(9.04 KB)
ðŸ“„ uio.h(732 B)
ðŸ“„ uleds.h(798 B)
ðŸ“„ ultrasound.h(4.46 KB)
ðŸ“„ un.h(384 B)
ðŸ“„ unistd.h(220 B)
ðŸ“„ unix_diag.h(1.22 KB)
ðŸ“ usb
ðŸ“„ usbdevice_fs.h(8.12 KB)
ðŸ“„ usbip.h(640 B)
ðŸ“„ userfaultfd.h(7.59 KB)
ðŸ“„ userio.h(1.48 KB)
ðŸ“„ utime.h(215 B)
ðŸ“„ utsname.h(669 B)
ðŸ“„ uuid.h(1.32 KB)
ðŸ“„ uvcvideo.h(2.57 KB)
ðŸ“„ v4l2-common.h(4.08 KB)
ðŸ“„ v4l2-controls.h(50.56 KB)
ðŸ“„ v4l2-dv-timings.h(30.82 KB)
ðŸ“„ v4l2-mediabus.h(4.98 KB)
ðŸ“„ v4l2-subdev.h(5.95 KB)
ðŸ“„ vbox_err.h(7.09 KB)
ðŸ“„ vbox_vmmdev_types.h(8.16 KB)
ðŸ“„ vboxguest.h(8.52 KB)
ðŸ“„ vdpa.h(1.39 KB)
ðŸ“„ version.h(430 B)
ðŸ“„ veth.h(224 B)
ðŸ“„ vfio.h(51 KB)
ðŸ“„ vfio_ccw.h(1.29 KB)
ðŸ“„ vfio_zdev.h(2.48 KB)
ðŸ“„ vhost.h(6.27 KB)
ðŸ“„ vhost_types.h(3.9 KB)
ðŸ“„ videodev2.h(88.61 KB)
ðŸ“„ virtio_9p.h(1.99 KB)
ðŸ“„ virtio_balloon.h(5.15 KB)
ðŸ“„ virtio_blk.h(6.64 KB)
ðŸ“„ virtio_bt.h(772 B)
ðŸ“„ virtio_config.h(3.91 KB)
ðŸ“„ virtio_console.h(3.06 KB)
ðŸ“„ virtio_crypto.h(13.55 KB)
ðŸ“„ virtio_fs.h(572 B)
ðŸ“„ virtio_gpu.h(11.19 KB)
ðŸ“„ virtio_ids.h(3.19 KB)
ðŸ“„ virtio_input.h(2.45 KB)
ðŸ“„ virtio_iommu.h(3.69 KB)
ðŸ“„ virtio_mem.h(6.99 KB)
ðŸ“„ virtio_mmio.h(4.85 KB)
ðŸ“„ virtio_net.h(10.3 KB)
ðŸ“„ virtio_pci.h(7.23 KB)
ðŸ“„ virtio_ring.h(7.32 KB)
ðŸ“„ virtio_rng.h(265 B)
ðŸ“„ virtio_scsi.h(5.89 KB)
ðŸ“„ virtio_snd.h(9.09 KB)
ðŸ“„ virtio_types.h(2.1 KB)
ðŸ“„ virtio_vsock.h(3.01 KB)
ðŸ“„ vm_sockets.h(6.34 KB)
ðŸ“„ vm_sockets_diag.h(963 B)
ðŸ“„ vmcore.h(431 B)
ðŸ“„ vsockmon.h(1.84 KB)
ðŸ“„ vt.h(2.99 KB)
ðŸ“„ vtpm_proxy.h(1.68 KB)
ðŸ“„ wait.h(682 B)
ðŸ“„ wanrouter.h(453 B)
ðŸ“„ watchdog.h(2.28 KB)
ðŸ“ wimax
ðŸ“„ wimax.h(8.17 KB)
ðŸ“„ wireless.h(41.7 KB)
ðŸ“„ wmi.h(1.84 KB)
ðŸ“„ x25.h(3.48 KB)
ðŸ“„ xattr.h(2.79 KB)
ðŸ“„ xdp_diag.h(1.43 KB)
ðŸ“„ xfrm.h(11.71 KB)
ðŸ“„ xilinx-v4l2-controls.h(2.91 KB)
ðŸ“„ zorro.h(3.22 KB)
ðŸ“„ zorro_ids.h(29.26 KB)

Editing: mdio.h

/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
 * linux/mdio.h: definitions for MDIO (clause 45) transceivers
 * Copyright 2006-2009 Solarflare Communications Inc.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published
 * by the Free Software Foundation, incorporated herein by reference.
 */

#ifndef __LINUX_MDIO_H__
#define __LINUX_MDIO_H__

#include <linux/types.h>
#include <linux/mii.h>

/* MDIO Manageable Devices (MMDs). */
#define MDIO_MMD_PMAPMD		1	/* Physical Medium Attachment/
					 * Physical Medium Dependent */
#define MDIO_MMD_WIS		2	/* WAN Interface Sublayer */
#define MDIO_MMD_PCS		3	/* Physical Coding Sublayer */
#define MDIO_MMD_PHYXS		4	/* PHY Extender Sublayer */
#define MDIO_MMD_DTEXS		5	/* DTE Extender Sublayer */
#define MDIO_MMD_TC		6	/* Transmission Convergence */
#define MDIO_MMD_AN		7	/* Auto-Negotiation */
#define MDIO_MMD_C22EXT		29	/* Clause 22 extension */
#define MDIO_MMD_VEND1		30	/* Vendor specific 1 */
#define MDIO_MMD_VEND2		31	/* Vendor specific 2 */

/* Generic MDIO registers. */
#define MDIO_CTRL1		MII_BMCR
#define MDIO_STAT1		MII_BMSR
#define MDIO_DEVID1		MII_PHYSID1
#define MDIO_DEVID2		MII_PHYSID2
#define MDIO_SPEED		4	/* Speed ability */
#define MDIO_DEVS1		5	/* Devices in package */
#define MDIO_DEVS2		6
#define MDIO_CTRL2		7	/* 10G control 2 */
#define MDIO_STAT2		8	/* 10G status 2 */
#define MDIO_PMA_TXDIS		9	/* 10G PMA/PMD transmit disable */
#define MDIO_PMA_RXDET		10	/* 10G PMA/PMD receive signal detect */
#define MDIO_PMA_EXTABLE	11	/* 10G PMA/PMD extended ability */
#define MDIO_PKGID1		14	/* Package identifier */
#define MDIO_PKGID2		15
#define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
#define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
#define MDIO_PCS_EEE_ABLE	20	/* EEE Capability register */
#define MDIO_PCS_EEE_ABLE2	21	/* EEE Capability register 2 */
#define MDIO_PMA_NG_EXTABLE	21	/* 2.5G/5G PMA/PMD extended ability */
#define MDIO_PCS_EEE_WK_ERR	22	/* EEE wake error counter */
#define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
#define MDIO_AN_EEE_LPABLE	61	/* EEE link partner ability */
#define MDIO_AN_EEE_ADV2	62	/* EEE advertisement 2 */
#define MDIO_AN_EEE_LPABLE2	63	/* EEE link partner ability 2 */

/* Media-dependent registers. */
#define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
#define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
#define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
					 * Lanes B-D are numbered 134-136. */
#define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
#define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
#define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
#define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
#define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
#define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */

/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
#define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
#define MDIO_PMA_LASI_TXCTRL	0x9001	/* TX_ALARM control */
#define MDIO_PMA_LASI_CTRL	0x9002	/* LASI control */
#define MDIO_PMA_LASI_RXSTAT	0x9003	/* RX_ALARM status */
#define MDIO_PMA_LASI_TXSTAT	0x9004	/* TX_ALARM status */
#define MDIO_PMA_LASI_STAT	0x9005	/* LASI status */

/* Control register 1. */
/* Enable extended speed selection */
#define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
/* All speed selection bits */
#define MDIO_CTRL1_SPEEDSEL		(MDIO_CTRL1_SPEEDSELEXT | 0x003c)
#define MDIO_CTRL1_FULLDPLX		BMCR_FULLDPLX
#define MDIO_CTRL1_LPOWER		BMCR_PDOWN
#define MDIO_CTRL1_RESET		BMCR_RESET
#define MDIO_PMA_CTRL1_LOOPBACK		0x0001
#define MDIO_PMA_CTRL1_SPEED1000	BMCR_SPEED1000
#define MDIO_PMA_CTRL1_SPEED100		BMCR_SPEED100
#define MDIO_PCS_CTRL1_LOOPBACK		BMCR_LOOPBACK
#define MDIO_PHYXS_CTRL1_LOOPBACK	BMCR_LOOPBACK
#define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
#define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
#define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
#define MDIO_PCS_CTRL1_CLKSTOP_EN	0x400	/* Stop the clock during LPI */

/* 10 Gb/s */
#define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
/* 10PASS-TS/2BASE-TL */
#define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
/* 2.5 Gb/s */
#define MDIO_CTRL1_SPEED2_5G		(MDIO_CTRL1_SPEEDSELEXT | 0x18)
/* 5 Gb/s */
#define MDIO_CTRL1_SPEED5G		(MDIO_CTRL1_SPEEDSELEXT | 0x1c)

/* Status register 1. */
#define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
#define MDIO_STAT1_LSTATUS		BMSR_LSTATUS
#define MDIO_STAT1_FAULT		0x0080	/* Fault */
#define MDIO_AN_STAT1_LPABLE		0x0001	/* Link partner AN ability */
#define MDIO_AN_STAT1_ABLE		BMSR_ANEGCAPABLE
#define MDIO_AN_STAT1_RFAULT		BMSR_RFAULT
#define MDIO_AN_STAT1_COMPLETE		BMSR_ANEGCOMPLETE
#define MDIO_AN_STAT1_PAGE		0x0040	/* Page received */
#define MDIO_AN_STAT1_XNP		0x0080	/* Extended next page status */

/* Speed register. */
#define MDIO_SPEED_10G			0x0001	/* 10G capable */
#define MDIO_PMA_SPEED_2B		0x0002	/* 2BASE-TL capable */
#define MDIO_PMA_SPEED_10P		0x0004	/* 10PASS-TS capable */
#define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
#define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
#define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
#define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
#define MDIO_PCS_SPEED_2_5G		0x0040	/* 2.5G capable */
#define MDIO_PCS_SPEED_5G		0x0080	/* 5G capable */

/* Device present registers. */
#define MDIO_DEVS_PRESENT(devad)	(1 << (devad))
#define MDIO_DEVS_C22PRESENT		MDIO_DEVS_PRESENT(0)
#define MDIO_DEVS_PMAPMD		MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
#define MDIO_DEVS_WIS			MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
#define MDIO_DEVS_PCS			MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
#define MDIO_DEVS_PHYXS			MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
#define MDIO_DEVS_DTEXS			MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
#define MDIO_DEVS_TC			MDIO_DEVS_PRESENT(MDIO_MMD_TC)
#define MDIO_DEVS_AN			MDIO_DEVS_PRESENT(MDIO_MMD_AN)
#define MDIO_DEVS_C22EXT		MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
#define MDIO_DEVS_VEND1			MDIO_DEVS_PRESENT(MDIO_MMD_VEND1)
#define MDIO_DEVS_VEND2			MDIO_DEVS_PRESENT(MDIO_MMD_VEND2)

/* Control register 2. */
#define MDIO_PMA_CTRL2_TYPE		0x000f	/* PMA/PMD type selection */
#define MDIO_PMA_CTRL2_10GBCX4		0x0000	/* 10GBASE-CX4 type */
#define MDIO_PMA_CTRL2_10GBEW		0x0001	/* 10GBASE-EW type */
#define MDIO_PMA_CTRL2_10GBLW		0x0002	/* 10GBASE-LW type */
#define MDIO_PMA_CTRL2_10GBSW		0x0003	/* 10GBASE-SW type */
#define MDIO_PMA_CTRL2_10GBLX4		0x0004	/* 10GBASE-LX4 type */
#define MDIO_PMA_CTRL2_10GBER		0x0005	/* 10GBASE-ER type */
#define MDIO_PMA_CTRL2_10GBLR		0x0006	/* 10GBASE-LR type */
#define MDIO_PMA_CTRL2_10GBSR		0x0007	/* 10GBASE-SR type */
#define MDIO_PMA_CTRL2_10GBLRM		0x0008	/* 10GBASE-LRM type */
#define MDIO_PMA_CTRL2_10GBT		0x0009	/* 10GBASE-T type */
#define MDIO_PMA_CTRL2_10GBKX4		0x000a	/* 10GBASE-KX4 type */
#define MDIO_PMA_CTRL2_10GBKR		0x000b	/* 10GBASE-KR type */
#define MDIO_PMA_CTRL2_1000BT		0x000c	/* 1000BASE-T type */
#define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
#define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
#define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
#define MDIO_PMA_CTRL2_2_5GBT		0x0030  /* 2.5GBaseT type */
#define MDIO_PMA_CTRL2_5GBT		0x0031  /* 5GBaseT type */
#define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
#define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
#define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
#define MDIO_PCS_CTRL2_10GBW		0x0002	/* 10GBASE-W type */
#define MDIO_PCS_CTRL2_10GBT		0x0003	/* 10GBASE-T type */

/* Status register 2. */
#define MDIO_STAT2_RXFAULT		0x0400	/* Receive fault */
#define MDIO_STAT2_TXFAULT		0x0800	/* Transmit fault */
#define MDIO_STAT2_DEVPRST		0xc000	/* Device present */
#define MDIO_STAT2_DEVPRST_VAL		0x8000	/* Device present value */
#define MDIO_PMA_STAT2_LBABLE		0x0001	/* PMA loopback ability */
#define MDIO_PMA_STAT2_10GBEW		0x0002	/* 10GBASE-EW ability */
#define MDIO_PMA_STAT2_10GBLW		0x0004	/* 10GBASE-LW ability */
#define MDIO_PMA_STAT2_10GBSW		0x0008	/* 10GBASE-SW ability */
#define MDIO_PMA_STAT2_10GBLX4		0x0010	/* 10GBASE-LX4 ability */
#define MDIO_PMA_STAT2_10GBER		0x0020	/* 10GBASE-ER ability */
#define MDIO_PMA_STAT2_10GBLR		0x0040	/* 10GBASE-LR ability */
#define MDIO_PMA_STAT2_10GBSR		0x0080	/* 10GBASE-SR ability */
#define MDIO_PMD_STAT2_TXDISAB		0x0100	/* PMD TX disable ability */
#define MDIO_PMA_STAT2_EXTABLE		0x0200	/* Extended abilities */
#define MDIO_PMA_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
#define MDIO_PMA_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
#define MDIO_PCS_STAT2_10GBR		0x0001	/* 10GBASE-R capable */
#define MDIO_PCS_STAT2_10GBX		0x0002	/* 10GBASE-X capable */
#define MDIO_PCS_STAT2_10GBW		0x0004	/* 10GBASE-W capable */
#define MDIO_PCS_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
#define MDIO_PCS_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */

/* Transmit disable register. */
#define MDIO_PMD_TXDIS_GLOBAL		0x0001	/* Global PMD TX disable */
#define MDIO_PMD_TXDIS_0		0x0002	/* PMD TX disable 0 */
#define MDIO_PMD_TXDIS_1		0x0004	/* PMD TX disable 1 */
#define MDIO_PMD_TXDIS_2		0x0008	/* PMD TX disable 2 */
#define MDIO_PMD_TXDIS_3		0x0010	/* PMD TX disable 3 */

/* Receive signal detect register. */
#define MDIO_PMD_RXDET_GLOBAL		0x0001	/* Global PMD RX signal detect */
#define MDIO_PMD_RXDET_0		0x0002	/* PMD RX signal detect 0 */
#define MDIO_PMD_RXDET_1		0x0004	/* PMD RX signal detect 1 */
#define MDIO_PMD_RXDET_2		0x0008	/* PMD RX signal detect 2 */
#define MDIO_PMD_RXDET_3		0x0010	/* PMD RX signal detect 3 */

/* Extended abilities register. */
#define MDIO_PMA_EXTABLE_10GCX4		0x0001	/* 10GBASE-CX4 ability */
#define MDIO_PMA_EXTABLE_10GBLRM	0x0002	/* 10GBASE-LRM ability */
#define MDIO_PMA_EXTABLE_10GBT		0x0004	/* 10GBASE-T ability */
#define MDIO_PMA_EXTABLE_10GBKX4	0x0008	/* 10GBASE-KX4 ability */
#define MDIO_PMA_EXTABLE_10GBKR		0x0010	/* 10GBASE-KR ability */
#define MDIO_PMA_EXTABLE_1000BT		0x0020	/* 1000BASE-T ability */
#define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
#define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
#define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
#define MDIO_PMA_EXTABLE_NBT		0x4000  /* 2.5/5GBASE-T ability */

/* PHY XGXS lane state register. */
#define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
#define MDIO_PHYXS_LNSTAT_SYNC1		0x0002
#define MDIO_PHYXS_LNSTAT_SYNC2		0x0004
#define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
#define MDIO_PHYXS_LNSTAT_ALIGN		0x1000

/* PMA 10GBASE-T pair swap & polarity */
#define MDIO_PMA_10GBT_SWAPPOL_ABNX	0x0001	/* Pair A/B uncrossed */
#define MDIO_PMA_10GBT_SWAPPOL_CDNX	0x0002	/* Pair C/D uncrossed */
#define MDIO_PMA_10GBT_SWAPPOL_AREV	0x0100	/* Pair A polarity reversed */
#define MDIO_PMA_10GBT_SWAPPOL_BREV	0x0200	/* Pair B polarity reversed */
#define MDIO_PMA_10GBT_SWAPPOL_CREV	0x0400	/* Pair C polarity reversed */
#define MDIO_PMA_10GBT_SWAPPOL_DREV	0x0800	/* Pair D polarity reversed */

/* PMA 10GBASE-T TX power register. */
#define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */

/* PMA 10GBASE-T SNR registers. */
/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
#define MDIO_PMA_10GBT_SNR_BIAS		0x8000
#define MDIO_PMA_10GBT_SNR_MAX		127

/* PMA 10GBASE-R FEC ability register. */
#define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
#define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */

/* PCS 10GBASE-R/-T status register 1. */
#define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */

/* PCS 10GBASE-R/-T status register 2. */
#define MDIO_PCS_10GBRT_STAT2_ERR	0x00ff
#define MDIO_PCS_10GBRT_STAT2_BER	0x3f00

/* AN 10GBASE-T control register. */
#define MDIO_AN_10GBT_CTRL_ADV2_5G	0x0080	/* Advertise 2.5GBASE-T */
#define MDIO_AN_10GBT_CTRL_ADV5G	0x0100	/* Advertise 5GBASE-T */
#define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */

/* AN 10GBASE-T status register. */
#define MDIO_AN_10GBT_STAT_LP2_5G	0x0020  /* LP is 2.5GBT capable */
#define MDIO_AN_10GBT_STAT_LP5G		0x0040  /* LP is 5GBT capable */
#define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
#define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
#define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
#define MDIO_AN_10GBT_STAT_REMOK	0x1000	/* Remote OK */
#define MDIO_AN_10GBT_STAT_LOCOK	0x2000	/* Local OK */
#define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
#define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */

/* EEE Supported/Advertisement/LP Advertisement registers.
 *
 * EEE capability Register (3.20), Advertisement (7.60) and
 * Link partner ability (7.61) registers have and can use the same identical
 * bit masks.
 */
#define MDIO_AN_EEE_ADV_100TX	0x0002	/* Advertise 100TX EEE cap */
#define MDIO_AN_EEE_ADV_1000T	0x0004	/* Advertise 1000T EEE cap */
/* Note: the two defines above can be potentially used by the user-land
 * and cannot remove them now.
 * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros
 * using the previous ones (that can be considered obsolete).
 */
#define MDIO_EEE_100TX		MDIO_AN_EEE_ADV_100TX	/* 100TX EEE cap */
#define MDIO_EEE_1000T		MDIO_AN_EEE_ADV_1000T	/* 1000T EEE cap */
#define MDIO_EEE_10GT		0x0008	/* 10GT EEE cap */
#define MDIO_EEE_1000KX		0x0010	/* 1000KX EEE cap */
#define MDIO_EEE_10GKX4		0x0020	/* 10G KX4 EEE cap */
#define MDIO_EEE_10GKR		0x0040	/* 10G KR EEE cap */
#define MDIO_EEE_40GR_FW	0x0100	/* 40G R fast wake */
#define MDIO_EEE_40GR_DS	0x0200	/* 40G R deep sleep */
#define MDIO_EEE_100GR_FW	0x1000	/* 100G R fast wake */
#define MDIO_EEE_100GR_DS	0x2000	/* 100G R deep sleep */

#define MDIO_EEE_2_5GT		0x0001	/* 2.5GT EEE cap */
#define MDIO_EEE_5GT		0x0002	/* 5GT EEE cap */

/* 2.5G/5G Extended abilities register. */
#define MDIO_PMA_NG_EXTABLE_2_5GBT	0x0001	/* 2.5GBASET ability */
#define MDIO_PMA_NG_EXTABLE_5GBT	0x0002	/* 5GBASET ability */

/* LASI RX_ALARM control/status registers. */
#define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
#define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
#define MDIO_PMA_LASI_RX_PMALFLT	0x0010	/* PMA/PMD RX local fault */
#define MDIO_PMA_LASI_RX_OPTICPOWERFLT	0x0020	/* RX optical power fault */
#define MDIO_PMA_LASI_RX_WISLFLT	0x0200	/* WIS local fault */

/* LASI TX_ALARM control/status registers. */
#define MDIO_PMA_LASI_TX_PHYXSLFLT	0x0001	/* PHY XS TX local fault */
#define MDIO_PMA_LASI_TX_PCSLFLT	0x0008	/* PCS TX local fault */
#define MDIO_PMA_LASI_TX_PMALFLT	0x0010	/* PMA/PMD TX local fault */
#define MDIO_PMA_LASI_TX_LASERPOWERFLT	0x0080	/* Laser output power fault */
#define MDIO_PMA_LASI_TX_LASERTEMPFLT	0x0100	/* Laser temperature fault */
#define MDIO_PMA_LASI_TX_LASERBICURRFLT	0x0200	/* Laser bias current fault */

/* LASI control/status registers. */
#define MDIO_PMA_LASI_LSALARM		0x0001	/* LS_ALARM enable/status */
#define MDIO_PMA_LASI_TXALARM		0x0002	/* TX_ALARM enable/status */
#define MDIO_PMA_LASI_RXALARM		0x0004	/* RX_ALARM enable/status */

/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */

#define MDIO_PHY_ID_C45			0x8000
#define MDIO_PHY_ID_PRTAD		0x03e0
#define MDIO_PHY_ID_DEVAD		0x001f
#define MDIO_PHY_ID_C45_MASK						\
	(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)

static __inline__ __u16 mdio_phy_id_c45(int prtad, int devad)
{
	return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
}

/* UsxgmiiChannelInfo[15:0] for USXGMII in-band auto-negotiation.*/
#define MDIO_USXGMII_EEE_CLK_STP	0x0080	/* EEE clock stop supported */
#define MDIO_USXGMII_EEE		0x0100	/* EEE supported */
#define MDIO_USXGMII_SPD_MASK		0x0e00	/* USXGMII speed mask */
#define MDIO_USXGMII_FULL_DUPLEX	0x1000	/* USXGMII full duplex */
#define MDIO_USXGMII_DPX_SPD_MASK	0x1e00	/* USXGMII duplex and speed bits */
#define MDIO_USXGMII_10			0x0000	/* 10Mbps */
#define MDIO_USXGMII_10HALF		0x0000	/* 10Mbps half-duplex */
#define MDIO_USXGMII_10FULL		0x1000	/* 10Mbps full-duplex */
#define MDIO_USXGMII_100		0x0200	/* 100Mbps */
#define MDIO_USXGMII_100HALF		0x0200	/* 100Mbps half-duplex */
#define MDIO_USXGMII_100FULL		0x1200	/* 100Mbps full-duplex */
#define MDIO_USXGMII_1000		0x0400	/* 1000Mbps */
#define MDIO_USXGMII_1000HALF		0x0400	/* 1000Mbps half-duplex */
#define MDIO_USXGMII_1000FULL		0x1400	/* 1000Mbps full-duplex */
#define MDIO_USXGMII_10G		0x0600	/* 10Gbps */
#define MDIO_USXGMII_10GHALF		0x0600	/* 10Gbps half-duplex */
#define MDIO_USXGMII_10GFULL		0x1600	/* 10Gbps full-duplex */
#define MDIO_USXGMII_2500		0x0800	/* 2500Mbps */
#define MDIO_USXGMII_2500HALF		0x0800	/* 2500Mbps half-duplex */
#define MDIO_USXGMII_2500FULL		0x1800	/* 2500Mbps full-duplex */
#define MDIO_USXGMII_5000		0x0a00	/* 5000Mbps */
#define MDIO_USXGMII_5000HALF		0x0a00	/* 5000Mbps half-duplex */
#define MDIO_USXGMII_5000FULL		0x1a00	/* 5000Mbps full-duplex */
#define MDIO_USXGMII_LINK		0x8000	/* PHY link with copper-side partner */

#endif /* __LINUX_MDIO_H__ */

X7ROOT File Manager

Editing: mdio.h

Upload File

Create Folder